Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

STM32F777NIH6 +BOM

ARM Microcontrollers - MCU

  • Hersteller:

    ST

  • Herstellerteil #:

    STM32F777NIH6

  • Datenblatt:

    STM32F777NIH6 Datenblatt (PDF) pdf-icon

  • Part Life Cycle Code:

    Active

  • Reach Compliance Code:

    compliant

  • ECCN Code:

    5A992.C

  • HTS Code:

    8542.31.00.01

STM32F777NIH6 Allgemeine Beschreibung

The STM32F777NIH6 microcontroller offers high performance and a wide range of features that make it suitable for a variety of applications. With a Cortex®-M7 core operating at up to 216 MHz frequency, this device includes a floating point unit, DSP instructions, and a memory protection unit for enhanced security. It also features high-speed embedded memories with up to 2 Mbytes of Flash memory, 512 Kbytes of SRAM, and various I/Os and peripherals connected to multiple buses for efficient data processing

Hauptmerkmale

  • Core: Arm® 32-bit Cortex®-M7 CPU with DPFPU, ART Accelerator™ and L1-cache: 16 Kbytes I/D cache, allowing 0-wait state execution from embedded Flash and external memories, up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
  • Memories
    • Up to 2 Mbytes of Flash memory organized into two banks allowing read-while-write
    • SRAM: 512 Kbytes (including 128 Kbytes of data TCM RAM for critical real-time data) + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of backup SRAM
    • Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories
  • Dual mode Quad-SPI
  • Graphics
    • Chrom-ART Accelerator™ (DMA2D), graphical hardware accelerator enabling enhanced graphical user interface
    • Hardware JPEG codec
    • LCD-TFT controller supporting up to XGA resolution
    • MIPI® DSI host controller supporting up to 720p 30 Hz resolution
  • Clock, reset and supply management
    • 1.7 V to 3.6 V application supply and I/Os
    • POR, PDR, PVD and BOR
    • Dedicated USB power
    • 4-to-26 MHz crystal oscillator
    • Internal 16 MHz factory-trimmed RC (1% accuracy)
    • 32 kHz oscillator for RTC with calibration
    • Internal 32 kHz RC with calibration
  • Low-power
    • Sleep, Stop and Standby modes
    • VBAT supply for RTC, 32×32 bit backup registers + 4 Kbytes backup SRAM
  • 3×12-bit, 2.4 MSPS ADC: up to 24 channels
  • Digital filters for sigma delta modulator (DFSDM), 8 channels / 4 filters
  • 2×12-bit D/A converters
  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
  • Up to 18 timers: up to thirteen 16-bit (1x low- power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers runni

Spezifikationen

Source Content uid STM32F777NIH6 Part Life Cycle Code Active
Reach Compliance Code compliant ECCN Code 5A992.C
HTS Code 8542.31.00.01 Factory Lead Time 53 Weeks, 1 Day
Date Of Intro 2017-09-12 Has ADC YES
Address Bus Width 26 Bit Size 32
Boundary Scan YES CPU Family CORTEX-M7
Clock Frequency-Max 50 MHz DAC Channels YES
DMA Channels YES External Data Bus Width 32
Format FLOATING POINT Integrated Cache YES
JESD-30 Code S-PBGA-B216 JESD-609 Code e1
Length 13 mm Low Power Mode YES
Moisture Sensitivity Level 3 Number of DMA Channels 16
Number of External Interrupts 16 Number of I/O Lines 159
Number of Serial I/Os 8 Number of Terminals 216
Number of Timers 16 On Chip Data RAM Width 8
On Chip Program ROM Width 8 Operating Temperature-Max 85 °C
Operating Temperature-Min -40 °C PWM Channels YES
Peak Reflow Temperature (Cel) 260 RAM (bytes) 544768
ROM (words) 2097152 ROM Programmability FLASH
Seated Height-Max 1.1 mm Speed 216 MHz
Supply Current-Max 100 mA Supply Voltage-Max 3.6 V
Supply Voltage-Min 1.7 V Supply Voltage-Nom 1.8 V
Surface Mount YES Technology CMOS
Temperature Grade INDUSTRIAL Terminal Finish TIN SILVER COPPER
Terminal Form BALL Terminal Pitch 0.8 mm
Terminal Position BOTTOM Width 13 mm
uPs/uCs/Peripheral ICs Type MICROCONTROLLER, RISC

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

payment Zahlung

Bezahlverfahren

hsbc
TT/Überweisung
paypal
Paypal
wu
Western Union
mg
Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]
Versand Versand & Verpackung

Versandart

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..

Garantie Garantie

Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.

Rezensionen

You need to log in to reply. Anmelden | Melden Sie sich an

In Stock: 7.128

Minimum Order: 1

Menge. Einzelpreis Ext. Preis
1+ - -

Die unten angegebenen Preise dienen nur als Referenz.