Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Privacy Policy.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

FT232HL-REEL +BOM

IC,INTERFACE; USB HI-SPEED TO UART/FIFO/SPI/JTAG,I2C; 1.8V-5.25V; 25MA; LQFP-48

Hersteller:

FTDI
Herstellerteil #:

FT232HL-REEL
Datenblatt:

FT232HL-REEL Datenblatt (PDF)
Series:

FT232
Product:

USB Controllers
Type:

Bridge, USB to UART/FIFO
Mounting Style:

SMD/SMT
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an FT232HL-REEL

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

FT232HL-REEL Allgemeine Beschreibung

USB TO UART/FIFO BRIDGE, -40 TO 85DEG C; Bridge Type:USB to UART, FIFO; Supply Voltage Min:1.62V; Supply Voltage Max:1.98V; IC Case / Package:LQFP; No. of Pins:48Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C RoHS Compliant: Yes

Hauptmerkmale

Single channel USB to serial / parallel ports with a variety of configurations.
Entire USB protocol handled on the chip. No USB specific firmware programming required. USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible. Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design. UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter). USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec. USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec Supports a proprietary half duplex FT1248 interface with a configurable width, bidirectional data bus (1, 2, 4 or 8 bits wide). CPU-style FIFO interface mode simplifies CPU interface design. Fast serial interface option. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases. Adjustable receive buffer timeout. Option for transmit and receive LED drive signals. Bit-bang Mode interface option with RD# and WR# strobes Highly integrated design includes 5V to 3.3/+1.8V LDO regulator for VCORE, integrated POR function Asynchronous serial UART interface option with full hardware handshaking and modem interface signals. Fully assisted hardware or X-On / X-Off software handshaking. UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity. Auto transmit enable control for RS485 serial applications using the TXDEN pin. Operational mode configuration and USB Description strings configurable in external EEPROM over the USB interface. Configurable I/O drives strength (4, 8, 12 or 16mA) and slew rate. Low operating and USB suspend current. Supports self powered, bus powered and high power bus powered USB configurations. UHCI/OHCI/EHCI host controller compatible. USB Bulk data transfer mode (512 byte packets in Hi-Speed mode). +1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant). Extended -40°C to 85°C industrial operating temperature range. Compact 48-pin Lead Free LQFP or QFN package Configurable ACBUS I/O pins.

Spezifikationen

Product Category	USB Interface IC	Series	FT232
Product	USB Controllers	Type	Bridge, USB to UART/FIFO
Mounting Style	SMD/SMT	Standard	USB 2.0
Speed	High Speed (HS), Full Speed (FS)	Data Rate	12 Mb/s
Supply Voltage - Min	1.62 V	Supply Voltage - Max	1.98 V
Operating Supply Current	50 mA	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Interface Type	UART
Moisture Sensitive	Yes	Operating Supply Voltage	1.8 V, 3.3 V
Product Type	USB Interface IC	Factory Pack Quantity	1500
Subcategory	Interface ICs	Tradename	H-CHIP
Unit Weight	0.006409 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..