Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

AK7756VF +BOM

Consumer Circuit, PDSO30, Lead Free, Plastic, VSOP-30

Hersteller:

Asahi Kasei Microdevices/AKM
Herstellerteil #:

AK7756VF
Datenblatt:

AK7756VF Datenblatt (PDF)
Type:

Floating Point
Interface:

I²C, SPI
Clock Rate:

8kHz
On-Chip RAM:

36.5kB

AK7756VF Allgemeine Beschreibung

GENERAL DESCRIPTIONThe AK7756 is a highly integrated digital signal processor, including a mono voice audio codec, a MIC pre-amplifier and digital audio I/F. The audio DSP has 9216step at fs = 8kHz parallel processing power. As the AK7756 is a RAM based DSP, it is programmable for user requirements such as hands free and acoustic effect. The AK7756EN is available in a space saving small 28pin QFN package and the AK7756VF is available in a 30pin VSOP package.FEATURES□ DSP - Word length: 24bit (Data RAM 24bit floating point) - Instruction cycle: 13.6 ns (9216 steps at fs=8 kHz) - Multiplier 20 x 20 → 36bit (double precision available) - Divider 20 / 20 → 20bit - ALU: 36bit arithmetic operation (with overflow margin 4bit) 24bit floating point arithmetic and logic operation - Program RAM: 3072 x 36bit - Coefficient RAM: 2048 x 20bit - Data RAM: 1024 x 24-bit (24bit floating point) - Delay RAM: 3072 x 20bit, 3072 x 20bit - Master Clock: 4.6MHz ~ 73.7MHz - JX pins (Interrupt)□ Audio Serial I/F - Master / Slave operation - Right / Left justified and I2S - PCM (Short / Long Frame) - 16bit linear, 8bit A-law, 8bit µ-law□ Mono CODEC - Sampling Rate 8KHz, 16KHz - DAC S/N: 91dB, S/(N+D): 83dB (fs:16kHz) - ADC S/N: 86dB, S/(N+D): 77dB (fs:16kHz)□ Microphone interface - Differential or single-ended input - Programmable Gain (+33dB ~ +15dB and 0dB, 3dB step) - Low Noise Microphone Bias□ Automatic Power Down (CODEC, DSP)□ μP I/F : SPI, I2C-slave□ I2C bootloader□ Power supply Analog (AVDD) : 3.0V ~ 3.6V (typ.3.3V) Digital1 (DVDD) : 3.0V ~ 3.6V (typ.3.3V) Digital2 (DVDD18) : 1.7V ~ 1.9V (typ.1.8V)□ Operating temperature range: -20°C ~ 85°C (AK7756EN), -40°C ~ 85°C (AK7756VF)□ Package: 28pin QFN (AK7756EN) 30pin VSOP (AK7756VF)

Hauptmerkmale

DSP
- Word length: 24bit (Data RAM 24bit floating point)
- Instruction cycle: 13.6 ns (9216 steps at fs=8 kHz)
- Multiplier 20 x 20 → 36bit (double precision available)
- Divider 20 / 20 → 20bit
- ALU: 36bit arithmetic operation (with overflow margin 4bit) 24bit floating point
arithmetic and logic operation
- Program RAM: 3072 x 36bit
- Coefficient RAM: 2048 x 20bit
- Data RAM: 1024 x 24-bit (24bit floating point)
- Delay RAM: 3072 x 20bit, 3072 x 20bit
- Master Clock: 4.6MHz ~ 73.7MHz
- JX pins (Interrupt)
Audio Serial I/F
- Master / Slave operation
- Right / Left justified and I2S
- PCM (Short / Long Frame)
- 16bit linear, 8bit A-law, 8bit µ-law
Mono CODEC
- Sampling Rate 8KHz, 16KHz
- DAC S/N: 91dB, S/(N+D): 83dB (fs:16kHz)
- ADC S/N: 86dB, S/(N+D): 77dB (fs:16kHz)
Microphone interface
- Differential or single-ended input
- Programmable Gain (+33dB ~ +15dB and 0dB, 3dB step)
- Low Noise Microphone Bias
Automatic Power Down (CODEC, DSP)
μP I/F : SPI, I2C-slave
I2C bootloader
Power supply
Analog (AVDD) : 3.0V ~ 3.6V (typ.3.3V)
Digital1 (DVDD) : 3.0V ~ 3.6V (typ.3.3V)
Digital2 (DVDD18) : 1.7V ~ 1.9V (typ.1.8V)
Operating temperature range: -20°C ~ 85°C (AK7756EN), -40°C ~ 85°C (AK7756VF)
Package:
28pin QFN (AK7756EN)
30pin VSOP (AK7756VF)

Spezifikationen

Type	Floating Point	Interface	I²C, SPI
Clock Rate	8kHz	Non-Volatile Memory	-
On-Chip RAM	36.5kB	Voltage - I/O	1.8V, 3.3V
Voltage - Core	1.8V, 3.3V	Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount	Series	AK7756

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..