Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

AT90CAN128-16AI +BOM

It comes in a 64-pin TQFP package for easy integration into electronic circuits

AT90CAN128-16AI Allgemeine Beschreibung

The AT90CAN128-16AI microcontroller from Atmel, now part of Microchip Technology, offers a comprehensive solution for automotive electronics. With its generous memory resources, high operating frequency, and support for the CAN protocol, it is well-suited for demanding automotive applications. Its extensive set of peripherals and compact TQFP package make it an attractive choice for developers looking for a balance of processing power and space efficiency in their designs. Whether it's managing communications between electronic control units or interfacing with various sensors and actuators, the AT90CAN128-16AI provides the capabilities required for modern automotive systems

Hauptmerkmale

  • High-performance, Low-power AVR® 8-bit Microcontroller
  • Advanced RISC Architecture
  • – 133 Powerful Instructions – Most Single Clock Cycle Execution
  • – 32 x 8 General Purpose Working Registers + Peripheral Control Registers
  • – Fully Static Operation
  • – Up to 16 MIPS Throughput at 16 MHz
  • – On-chip 2-cycle Multiplier
  • Non volatile Program and Data Memories
  • – 128K Bytes of In-System Reprogrammable Flash
  • Endurance: 10,000 Write/Erase Cycles
  • – Optional Boot Code Section with Independent Lock Bits
  • Selectable Boot Size: 1K Bytes, 2K Bytes, 4K Bytes or 8K Bytes
  • In-System Programming by On-Chip Boot Program (CAN, UART)
  • True Read-While-Write Operation
  • – 4K Bytes EEPROM (Endurance: 100,000 Write/Erase Cycles)
  • – 4K Bytes Internal SRAM
  • – Up to 64K Bytes Optional External Memory Space
  • – Programming Lock for Software Security
  • JTAG (IEEE std. 1149.1 Compliant) Interface
  • – Boundary-scan Capabilities According to the JTAG Standard
  • – Programming Flash (Hardware ISP), EEPROM, Lock & Fuse Bits
  • – Extensive On-chip Debug Support
  • CAN Controller 2.0A & 2.0B
  • – 15 Full Message Objects with Separate Identifier Tags and Masks
  • – Transmit, Receive, Automatic Reply and Frame Buffer Receive Modes
  • – 1Mbits/s Maximum Transfer Rate at 8 MHz
  • – Time stamping, TTC & Listening Mode (Spying or Autobaud)
  • Peripheral Features
  • – Programmable Watchdog Timer with On-chip Oscillator
  • – 8-bit Synchronous Timer/Counter-0
  • 10-bit Prescaler
  • External Event Counter
  • Output Compare or 8-bit PWM Output
  • – 8-bit Asynchronous Timer/Counter-2
  • 10-bit Prescaler
  • External Event Counter
  • Output Compare or 8-Bit PWM Output
  • 32Khz Oscillator for RTC Operation
  • – Dual 16-bit Synchronous Timer/Counters-1 & 3
  • 10-bit Prescaler
  • Input Capture with Noise Canceler
  • External Event Counter
  • 3-Output Compare or 16-Bit PWM Output
  • Output Compare Modulation
  • – 8-channel, 10-bit SAR ADC
  • 8 Single-ended channels
  • 7 Differential Channels
  • 2 Differential Channels With Programmable Gain at 1x, 10x, or 200x
  • – On-chip Analog Comparator
  • – Byte-oriented Two-wire Serial Interface
  • – Dual Programmable Serial USART
  • – Master/Slave SPI Serial Interface
  • Programming Flash (Hardware ISP)
  • Special Microcontroller Features
  • – Power-on Reset and Programmable Brown-out Detection
  • – Internal Calibrated RC Oscillator
  • – 8 External Interrupt Sources
  • – 5 Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down & Standby
  • – Software Selectable Clock Frequency
  • – Global Pull-up Disable
  • I/O and Packages
  • – 53 Programmable I/O Lines
  • – 64-lead TQFP and 64-lead QFN
  • Operating Voltages
  • – 2.7 - 5.5V
  • Operating temperature
  • – Industrial (-40°C to +85°C)
  • Maximum Frequency
  • – 8 MHz at 2.7V - Industrial range
  • – 16 MHz at 4.5V - Industrial range

Spezifikationen

Series AVR® 90CAN Programmabe Not Verified
Core Processor AVR Core Size 8-Bit
Speed 16MHz Connectivity CANbus, EBI/EMI, I2C, SPI, UART/USART
Peripherals Brown-out Detect/Reset, POR, PWM, WDT Number of I/O 53
Program Memory Size 128KB (128K x 8) Program Memory Type FLASH
EEPROM Size 4K x 8 RAM Size 4K x 8
Voltage - Supply (Vcc/Vdd) 2.7V ~ 5.5V Data Converters A/D 8x10b
Oscillator Type Internal Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount Base Product Number AT90CAN128

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

payment Zahlung

Bezahlverfahren

hsbc
TT/Überweisung
paypal
Paypal
wu
Western Union
mg
Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]
Versand Versand & Verpackung

Versandart

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..

Garantie Garantie

Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.

Rezensionen

You need to log in to reply. Anmelden | Melden Sie sich an