Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

AT90S4433 +BOM

AT90S4433 - Product Description - Microchip Technology

Hersteller:

Microchip
Herstellerteil #:

AT90S4433
Datenblatt:

AT90S4433 Datenblatt (PDF)
Paket/Koffer:

QFP-32
Produktart:

LED Drivers
RoHS:
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an AT90S4433

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AT90S4433 Allgemeine Beschreibung

DescriptionThe AT90S2333/4433 is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the AT90S2333/4433 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.Features• High-performance and Low-power AVR® 8-bit RISC Architecture – 118 Powerful Instructions - Most Single Cycle Execution – 32 x 8 General Purpose Working Registers – Up to 8 MIPS Throughput at 8 MHz• Data and Nonvolatile Program Memory – 2K/4K Bytes of In-System Programmable Flash Endurance 1,000 Write/Erase Cycles – 128 Bytes of SRAM – 128/256 Bytes of In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles – Programming Lock for Flash Program and EEPROM Data Security• Peripheral Features – One 8-bit Timer/Counter with Separate Prescaler – Expanded 16-bit Timer/Counter with Separate Prescaler, Compare, Capture Modes and 8-, 9- or 10-bit PWM – On-chip Analog Comparator – Programmable Watchdog Timer with Separate On-chip Oscillator – Programmable UART – 6-channel, 10-bit ADC – Master/Slave SPI Serial Interface• Special Microcontroller Features – Brown-Out Reset Circuit – Enhanced Power-on Reset Circuit – Low-Power Idle and Power Down Modes – External and Internal Interrupt Sources• Specifications – Low-power, High-speed CMOS Process Technology – Fully Static Operation• Power Consumption at 4 MHz, 3V, 25°C – Active: 3.4 mA – Idle Mode: 1.4 mA – Power Down Mode: <1 µA• I/O and Packages – 20 Programmable I/O Lines – 28-pin PDIP and 32-pin TQFP• Operating Voltage – 2.7V - 6.0V (AT90LS2333 and AT90LS4433) – 4.0V - 6.0V (AT90S2333 and AT90S4433)• Speed Grades – 0 - 4 MHz (AT90LS2333 and AT90LS4433) – 0 - 8 MHz (AT90S2333 and AT90S4433)

Hauptmerkmale

High-performance and Low-power AVR® 8-bit RISC Architecture
– 118 Powerful Instructions - Most Single Cycle Execution
– 32 x 8 General Purpose Working Registers
– Up to 8 MIPS Throughput at 8 MHz
Data and Nonvolatile Program Memory
– 2K/4K Bytes of In-System Programmable Flash Endurance 1,000 Write/Erase Cycles
– 128 Bytes of SRAM
– 128/256 Bytes of In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles
– Programming Lock for Flash Program and EEPROM Data Security
Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler
– Expanded 16-bit Timer/Counter with Separate Prescaler, Compare, Capture Modes and 8-, 9- or 10-bit PWM
– On-chip Analog Comparator
– Programmable Watchdog Timer with Separate On-chip Oscillator
– Programmable UART
– 6-channel, 10-bit ADC
– Master/Slave SPI Serial Interface
Special Microcontroller Features
– Brown-Out Reset Circuit
– Enhanced Power-on Reset Circuit
– Low-Power Idle and Power Down Modes
– External and Internal Interrupt Sources
Specifications
– Low-power, High-speed CMOS Process Technology
– Fully Static Operation
Power Consumption at 4 MHz, 3V, 25°C
– Active: 3.4 mA
– Idle Mode: 1.4 mA
– Power Down Mode: <1 µA
I/O and Packages
– 20 Programmable I/O Lines
– 28-pin PDIP and 32-pin TQFP
Operating Voltage
– 2.7V - 6.0V (AT90LS2333 and AT90LS4433)
– 4.0V - 6.0V (AT90S2333 and AT90S4433)
Speed Grades
– 0 - 4 MHz (AT90LS2333 and AT90LS4433)
– 0 - 8 MHz (AT90S2333 and AT90S4433)

Spezifikationen

Product Category

Microchip Technology

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..