Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

AT90S8515-8JI +BOM

Features of AT90S8515-8JI: 8-bit architecture, 8K Flash memory, 5V operation

Hersteller:

Microchip Technology
Herstellerteil #:

AT90S8515-8JI
Datenblatt:

AT90S8515-8JI Datenblatt (PDF)
Series:

AVR® 90S
Programmabe:

Not Verified
Core Processor:

AVR
Core Size:

8-Bit
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an AT90S8515-8JI

AT90S8515-8JI Allgemeine Beschreibung

Atmel's AT90S8515-8JI is a powerful 8-bit microcontroller with advanced features that make it suitable for a wide range of applications. Its RISC architecture and powerful instruction set enable it to operate at a maximum frequency of 8 MHz, while the 8KB of in-system programmable flash memory, 512 bytes of EEPROM, and 512 bytes of SRAM provide ample storage for data manipulation and storage. With a wide operating voltage range of 4.0V to 6.0V, it is well-suited for battery-powered and portable devices. Additionally, the microcontroller boasts 32 general-purpose I/O lines, a 12-channel, 10-bit analog-to-digital converter, two 8-bit timers/counters, a programmable serial USART, and a programmable watchdog timer. Housed in a 40-pin PDIP package, it is easy to integrate into existing systems, making it a convenient option for developers and engineers

Hauptmerkmale

8K bytes of In-System Programmable Flash, 512 bytes EEPROM, 512 bytes SRAM, 32 general-purpose I/O lines, 32 general purpose working registers, flexible timer/counters with compare modes, internal and external interrupts, a programmable serial UART, programmable Watchdog Timer with internal oscillator, an SPI serial port and two software-selectable power-saving modes. The Idle Mode stops the CPU while allowing the SRAM, timer/counters, SPI port and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the oscillator, disabling all other chip functions until the next external interrupt or hardware reset.
Features
Utilizes the AVR® RISC Architecture
AVR – High-performance and Low-power RISC Architecture
– 118 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General-purpose Working Registers
– Up to 8 MIPS Throughput at 8 MHz
Data and Nonvolatile Program Memory
– 8K Bytes of In-System Programmable Flash Endurance: 1,000 Write/Erase Cycles
– 512 Bytes of SRAM
– 512 Bytes of In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles
– Programming Lock for Flash Program and EEPROM Data Security
Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler
– One 16-bit Timer/Counter with Separate Prescaler Compare, Capture Modes and Dual 8-, 9-, or 10-bit PWM
– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– Programmable Serial UART
– Master/Slave SPI Serial Interface
Special Microcontroller Features
– Low-power Idle and Power-down Modes
– External and Internal Interrupt Sources
Specifications
– Low-power, High-speed CMOS Process Technology
– Fully Static Operation
Power Consumption at 4 MHz, 3V, 25°C
– Active: 3.0 mA
– Idle Mode: 1.0 mA
– Power-down Mode: <1 µA
I/O and Packages
– 32 Programmable I/O Lines
– 40-lead PDIP, 44-lead PLCC and TQFP
Operating Voltages
– 2.7 - 6.0V for AT90S8515-4
– 4.0 - 6.0V for AT90S8515-8
Speed Grades
– 0 - 4 MHz for AT90S8515-4
– 0 - 8 MHz for AT90S8515-8

Spezifikationen

Series	AVR® 90S	Programmabe	Not Verified
Core Processor	AVR	Core Size	8-Bit
Speed	8MHz	Connectivity	SPI, UART/USART
Peripherals	Brown-out Detect/Reset, POR, PWM, WDT	Number of I/O	32
Program Memory Size	8KB (4K x 16)	Program Memory Type	FLASH
EEPROM Size	512 x 8	RAM Size	512 x 8
Voltage - Supply (Vcc/Vdd)	4V ~ 6V	Oscillator Type	Internal
Operating Temperature	-40°C ~ 85°C	Mounting Type	Surface Mount
Base Product Number	AT90S8515

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..