Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

AT90USB1286-16MU +BOM

AT90USB1286-16MU is a green CMOS RISC microcontroller with 8-bit architecture, running at 16MHz

Hersteller:

ATMEL CORP
Herstellerteil #:

AT90USB1286-16MU
Datenblatt:

AT90USB1286-16MU Datenblatt (PDF)
Part Life Cycle Code:

Transferred
Pin Count:

64
Reach Compliance Code:

compliant
HTS Code:

8542.31.00.01
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an AT90USB1286-16MU

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AT90USB1286-16MU Allgemeine Beschreibung

Designed with USB connectivity in mind, the AT90USB1286-16MU microcontroller is an ideal choice for applications requiring reliable and high-speed data transmission. Its USB 2.0 full-speed operation and compatibility with various USB classes make it easy to integrate into existing systems, while its low power consumption and high performance cater to battery-powered applications. The inclusion of communication interfaces such as UART, SPI, and I2C further expands its connectivity options, allowing seamless interaction with peripheral devices. Whether it's for USB peripherals, keyboards, or mice, this microcontroller offers the necessary features and capabilities to meet the demands of modern USB-connected applications

Hauptmerkmale

High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
– 135 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-Chip 2-cycle Multiplier
Non-volatile Program and Data Memories
– 64/128K Bytes of In-System Self-Programmable Flash
Endurance: 100,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program hardware activated after
reset
True Read-While-Write Operation
– 2K/4K (64K/128K Flash version) Bytes EEPROM
Endurance: 100,000 Write/Erase Cycles
– 4K/8K (64K/128K Flash version) Bytes Internal SRAM
– Up to 64K Bytes Optional External Memory Space
– Programming Lock for Software Security
JTAG (IEEE std. 1149.1 compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
USB 2.0 Full-speed/Low-speed Device and On-The-Go Module
– Complies fully with:
– Universal Serial Bus Specification REV 2.0
– On-The-Go Supplement to the USB 2.0 Specification Rev 1.0
– Supports data transfer rates up to 12 Mbit/s and 1.5 Mbit/s
USB Full-speed/Low Speed Device Module with Interrupt on Transfer Completion
– Endpoint 0 for Control Transfers : up to 64-bytes
– 6 Programmable Endpoints with IN or Out Directions and with Bulk, Interrupt or
Isochronous Transfers
– Configurable Endpoints size up to 256 bytes in double bank mode
– Fully independant 832 bytes USB DPRAM for endpoint memory allocation
– Suspend/Resume Interrupts
– Power-on Reset and USB Bus Reset
– 48 MHz PLL for Full-speed Bus Operation
– USB Bus Disconnection on Microcontroller Request
USB OTG:
– Supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
for OTG dual-role devices
– Provide Status and control signals for software implementation of HNP and SRP
– Provides programmable times required for HNP and SRP
Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– Two16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode
– Real Time Counter with Separate Oscillator
– Two 8-bit PWM Channels
– Six PWM Channels with Programmable Resolution from 2 to 16 Bits
– Output Compare Modulator
– 8-channels, 10-bit ADC
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Byte Oriented 2-wire Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
I/O and Packages
– 48 Programmable I/O Lines
– 64-lead TQFP and 64-lead QFN
Operating Voltages
– 2.7 - 5.5V
– 2.2 - 5.5V (Check availabilty)
Operating temperature
– Industrial (-40°C to +85°C)
Maximum Frequency
– 8 MHz at 2.7V - Industrial range
– 16 MHz at 4.5V - Industrial range

Spezifikationen

Part Life Cycle Code	Transferred	Pin Count	64
Reach Compliance Code	compliant	HTS Code	8542.31.00.01
Core Architecture	AVR	Device Core	AVR
Clock Speed	16	Ram	8
Flash Memory	128	Can	0
Adc Channels	8	Adc Resolution	10
Has ADC	YES	Additional Feature	ALSO OPERATES AT 1.8V MINIMUM SUPPLY
Address Bus Width	16	Bit Size	8
Clock Frequency-Max	16 MHz	DAC Channels	NO
DMA Channels	NO	External Data Bus Width	8
JESD-30 Code	S-XQCC-N64	Length	9 mm
Number of I/O Lines	48	Number of Terminals	64
On Chip Program ROM Width	16	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	PWM Channels	YES
Power Supplies	3/5 V	Qualification Status	Not Qualified
RAM (bytes)	8192	ROM (words)	65536
ROM Programmability	FLASH	Seated Height-Max	1 mm
Speed	16 MHz	Supply Current-Max	30 mA
Supply Voltage-Max	5.5 V	Supply Voltage-Min	4.5 V
Supply Voltage-Nom	5 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	INDUSTRIAL
Terminal Form	NO LEAD	Terminal Pitch	0.5 mm
Terminal Position	QUAD	Width	9 mm
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..