Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

AT90USB1287-16AU +BOM

AT90USB1287-16AU 2.7V~5.5V AVR 16MHz 48 TQFP-64(14x14) Microcontroller Units

Hersteller:

Microchip
Herstellerteil #:

AT90USB1287-16AU
Datenblatt:

AT90USB1287-16AU Datenblatt (PDF)
Series:

AT90USB1287
Mounting Style:

SMD/SMT
Core:

AVR
Program Memory Size:

128 kB
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an AT90USB1287-16AU

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AT90USB1287-16AU Allgemeine Beschreibung

Industrial-grade certification ensures that this microcontroller can withstand demanding operating conditions, from extreme temperatures to challenging environments. Whether you're developing a project in the field of automation, robotics, or consumer electronics, the AT90USB1287-16AU offers a blend of performance, functionality, and reliability that is hard to match

Hauptmerkmale

High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
– 135 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-Chip 2-cycle Multiplier
Non-volatile Program and Data Memories
– 32/64/128K Bytes of In-System Self-Programmable Flash
Endurance: 100,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
USB Bootloader programmed by default in the Factory
In-System Programming by On-chip Boot Program hardware activated after reset
True Read-While-Write Operation
All supplied parts are preprogramed with a default USB bootloader
– 1K/2K/4K (32K/64K/128K Flash version) Bytes EEPROM
Endurance: 100,000 Write/Erase Cycles
– 2.5K/4K/8K (32K/64K/128K Flash version) Bytes Internal SRAM
– Up to 64K Bytes Optional External Memory Space
– Programming Lock for Software Security
JTAG (IEEE std. 1149.1 compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
USB 2.0 Full-speed/Low-speed Device and On-The-Go Module
– Complies fully with:
– Universal Serial Bus Specification REV 2.0
– On-The-Go Supplement to the USB 2.0 Specification Rev 1.0
– Supports data transfer rates up to 12 Mbit/s and 1.5 Mbit/s
USB Full-speed/Low Speed Device Module with Interrupt on Transfer Completion
– Endpoint 0 for Control Transfers : up to 64-bytes
– 6 Programmable Endpoints with IN or Out Directions and with Bulk, Interrupt or Isochronous Transfers
– Configurable Endpoints size up to 256 bytes in double bank mode
– Fully independant 832 bytes USB DPRAM for endpoint memory allocation
– Suspend/Resume Interrupts
– Power-on Reset and USB Bus Reset
– 48 MHz PLL for Full-speed Bus Operation
– USB Bus Disconnection on Microcontroller Request
USB OTG Reduced Host :
– Supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) for OTG dual-role devices
– Provide Status and control signals for software implementation of HNP and SRP
– Provides programmable times required for HNP and SRP
Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– Two16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode
– Real Time Counter with Separate Oscillator
– Four 8-bit PWM Channels
– Six PWM Channels with Programmable Resolution from 2 to 16 Bits
– Output Compare Modulator
– 8-channels, 10-bit ADC
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Byte Oriented 2-wire Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
I/O and Packages
– 48 Programmable I/O Lines
– 64-lead TQFP and 64-lead QFN
Operating Voltages
– 2.7 - 5.5V
Operating temperature
– Industrial (-40°C to +85°C)
Maximum Frequency
– 8 MHz at 2.7V - Industrial range
– 16 MHz at 4.5V - Industrial range

Spezifikationen

Product Category	8-bit Microcontrollers - MCU	Series	AT90USB1287
Mounting Style	SMD/SMT	Core	AVR
Program Memory Size	128 kB	Data Bus Width	8 bit
ADC Resolution	10 bit	Maximum Clock Frequency	16 MHz
Number of I/Os	48 I/O	Data RAM Size	8 kB
Supply Voltage - Min	2.7 V	Supply Voltage - Max	5.5 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Data RAM Type	SRAM	Height	1.05 mm
Interface Type	2-Wire, SPI, USART	Length	14 mm
Moisture Sensitive	Yes	Number of ADC Channels	5 Channel
Number of Timers/Counters	4 Timer	Product Type	8-bit Microcontrollers - MCU
Program Memory Type	Flash	Factory Pack Quantity	450
Subcategory	Microcontrollers - MCU	Width	14 mm
Unit Weight	0.012720 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..