Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

AT90USB647-16AU +BOM

Atmel's AT90USB647-16AU Microcontroller

Hersteller:

MICROCHIP TECHNOLOGY INC
Herstellerteil #:

AT90USB647-16AU
Datenblatt:

AT90USB647-16AU Datenblatt (PDF)
Part Life Cycle Code:

Obsolete
Reach Compliance Code:

compliant
HTS Code:

8542.31.00.01
Has ADC:

YES
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an AT90USB647-16AU

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AT90USB647-16AU Allgemeine Beschreibung

The AT90USB647-16AU microcontroller, manufactured by Atmel (now Microchip Technology), is a versatile and high-performance 8-bit microcontroller designed for a wide range of applications. With its maximum operating frequency of 16MHz and ample memory resources including 64KB of flash memory, 4KB of SRAM, and 2KB of EEPROM, this microcontroller is capable of handling complex tasks with ease. Its USB 2.0 Full Speed interface makes it easy to connect to various USB devices, while its numerous I/O pins, ADC channels, USARTs, SPI ports, and TWI interface provide ample options for interfacing with external devices. Whether you are developing USB-based peripheral devices, industrial control systems, or consumer electronics, the AT90USB647-16AU offers the connectivity and performance needed to bring your designs to life. With support for in-circuit programming via the JTAG interface and compatibility with the AVR Studio IDE, programming and debugging your applications is straightforward and efficient

Hauptmerkmale

High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
– 135 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-Chip 2-cycle Multiplier
Non-volatile Program and Data Memories
– 32/64/128K Bytes of In-System Self-Programmable Flash
Endurance: 100,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
USB Bootloader programmed by default in the Factory
In-System Programming by On-chip Boot Program hardware activated after
reset
True Read-While-Write Operation
All supplied parts are preprogramed with a default USB bootloader
– 1K/2K/4K (32K/64K/128K Flash version) Bytes EEPROM
Endurance: 100,000 Write/Erase Cycles
– 2.5K/4K/8K (32K/64K/128K Flash version) Bytes Internal SRAM
– Up to 64K Bytes Optional External Memory Space
– Programming Lock for Software Security
JTAG (IEEE std. 1149.1 compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
USB 2.0 Full-speed/Low-speed Device and On-The-Go Module
– Complies fully with:
– Universal Serial Bus Specification REV 2.0
– On-The-Go Supplement to the USB 2.0 Specification Rev 1.0
– Supports data transfer rates up to 12 Mbit/s and 1.5 Mbit/s
USB Full-speed/Low Speed Device Module with Interrupt on Transfer Completion
– Endpoint 0 for Control Transfers : up to 64-bytes
– 6 Programmable Endpoints with IN or Out Directions and with Bulk, Interrupt or
Isochronous Transfers
– Configurable Endpoints size up to 256 bytes in double bank mode
– Fully independant 832 bytes USB DPRAM for endpoint memory allocation
– Suspend/Resume Interrupts
– Power-on Reset and USB Bus Reset
– 48 MHz PLL for Full-speed Bus Operation
– USB Bus Disconnection on Microcontroller Request
USB OTG Reduced Host :
– Supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
for OTG dual-role devices
– Provide Status and control signals for software implementation of HNP and SRP
– Provides programmable times required for HNP and SRP
Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– Two16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode
– Real Time Counter with Separate Oscillator
– Four 8-bit PWM Channels
– Six PWM Channels with Programmable Resolution from 2 to 16 Bits
– Output Compare Modulator
– 8-channels, 10-bit ADC
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Byte Oriented 2-wire Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
I/O and Packages
– 48 Programmable I/O Lines
– 64-lead TQFP and 64-lead QFN
Operating Voltages
– 2.7 - 5.5V
Operating temperature
– Industrial (-40°C to +85°C)
Maximum Frequency
– 8 MHz at 2.7V - Industrial range
– 16 MHz at 4.5V - Industrial range

Spezifikationen

Source Content uid	AT90USB647-16AU	Part Life Cycle Code	Obsolete
Reach Compliance Code	compliant	HTS Code	8542.31.00.01
Has ADC	YES	Additional Feature	ALSO OPERATES AT 1.8V MINIMUM SUPPLY
Address Bus Width	16	Bit Size	8
Clock Frequency-Max	16 MHz	DAC Channels	NO
DMA Channels	NO	External Data Bus Width	8
JESD-30 Code	S-PQFP-G64	Length	14 mm
Number of I/O Lines	48	Number of Terminals	64
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
PWM Channels	YES	Power Supplies	3/5 V
Qualification Status	Not Qualified	RAM (bytes)	4096
ROM (words)	65536	ROM Programmability	FLASH
Seated Height-Max	1.2 mm	Speed	16 MHz
Supply Current-Max	30 mA	Supply Voltage-Max	5.5 V
Supply Voltage-Min	4.5 V	Supply Voltage-Nom	5 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Form	GULL WING
Terminal Pitch	0.8 mm	Terminal Position	QUAD
Width	14 mm	uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..