Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

ATMEGA128L-8AI +BOM

ATMEGA128L-8AI Microcontroller Units with TQFP-64-EP(10x10)

Hersteller:

Microchip
Herstellerteil #:

ATMEGA128L-8AI
Datenblatt:

ATMEGA128L-8AI Datenblatt (PDF)
Series:

ATmega128
Mounting Style:

SMD/SMT
Core:

AVR
Program Memory Size:

128 kB
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an ATMEGA128L-8AI

ATMEGA128L-8AI Allgemeine Beschreibung

The ATMEGA128L-8AI microcontroller offers a perfect balance of performance and power efficiency. With its 8-bit RISC architecture and 128KB of flash memory, this microcontroller is ideal for a wide range of applications. The low-power consumption of the ATMEGA128L-8AI makes it a great choice for battery-powered devices, providing long-lasting performance

Hauptmerkmale

High-performance, Low-power AVR® 8-bit Microcontroller
Advanced RISC Architecture
– 133 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers + Peripheral Control Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-chip 2-cycle Multiplier
Nonvolatile Program and Data Memories
– 128K Bytes of In-System Reprogrammable Flash
Endurance: 10,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– 4K Bytes EEPROM
Endurance: 100,000 Write/Erase Cycles
– 4K Bytes Internal SRAM
– Up to 64K Bytes Optional External Memory Space
– Programming Lock for Software Security
– SPI Interface for In-System Programming
JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses and Lock Bits through the JTAG Interface
Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
– Two Expanded 16-bit Timer/Counters with Separate Prescaler, Compare Mode and
Capture Mode
– Real Time Counter with Separate Oscillator
– Two 8-bit PWM Channels
– 6 PWM Channels with Programmable Resolution from 2 to 16 Bits
– Output Compare Modulator
– 8-channel, 10-bit ADC
8 Single-ended Channels
7 Differential Channels
2 Differential Channels with Programmable Gain at 1x, 10x, or 200x
– Byte-oriented Two-wire Serial Interface
– Dual Programmable Serial USARTs
– Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with On-chip Oscillator
– On-chip Analog Comparator
Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby,
and Extended Standby
– Software Selectable Clock Frequency
– ATmega103 Compatibility Mode Selected by a Fuse
– Global Pull-up Disable
I/O and Packages
– 53 Programmable I/O Lines
– 64-lead TQFP and 64-pad QFN/MLF
Operating Voltages
– 2.7 - 5.5V for ATmega128L
– 4.5 - 5.5V for ATmega128
Speed Grades
– 0 - 8 MHz for ATmega128L
– 0 - 16 MHz for ATmega128

Spezifikationen

Product Category	8-bit Microcontrollers - MCU	Series	ATmega128
Mounting Style	SMD/SMT	Core	AVR
Program Memory Size	128 kB	Data Bus Width	8 bit
ADC Resolution	10 bit	Maximum Clock Frequency	8 MHz
Number of I/Os	53 I/O	Data RAM Size	4 kB
Supply Voltage - Min	2.7 V	Supply Voltage - Max	5.5 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Data RAM Type	SRAM	Data ROM Size	4 kB
Data ROM Type	EEPROM	Height	1 mm
Interface Type	2-Wire, JTAG, SPI, USART	Length	14 mm
Moisture Sensitive	Yes	Number of ADC Channels	8 Channel
Number of Timers/Counters	2 Timer	Processor Series	megaAVR
Product	MCU	Product Type	8-bit Microcontrollers - MCU
Program Memory Type	Flash	Factory Pack Quantity	90
Subcategory	Microcontrollers - MCU	Tradename	AVR
Width	14 mm	Unit Weight	0.012720 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..