Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Privacy Policy.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

ATSAMD11D14A-MUT +BOM

ARM Microcontrollers - MCU IC MCU 32 BIT 16KB Flash 24QFN

Hersteller:

MICROCHIP
Herstellerteil #:

ATSAMD11D14A-MUT
Datenblatt:

ATSAMD11D14A-MUT Datenblatt (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

3A991.A.2
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an ATSAMD11D14A-MUT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ATSAMD11D14A-MUT Allgemeine Beschreibung

The ATSAMD11D14A-MUT microcontroller is a versatile and energy-efficient solution for a wide range of embedded systems. Its combination of high performance, low power consumption, and security features make it well-suited for applications in various industries, including consumer electronics, Internet of Things (IoT) devices, and industrial automation. Whether it's used to control sensors, communicate with other devices, or process data securely, the ATSAMD11D14A-MUT offers the capabilities needed to bring innovative and reliable products to market

Hauptmerkmale

Single-cycle hardware multiplier
Micro Trace Buffer
16KB in-system self-programmable Flash
4KB SRAM Memory
Power-on reset (POR) and brown-out detection (BOD)
Internal and external clock options with 48MHDigital Frequency Locked Loop (DFLL48M) and 48MHto 96MHFractional
Digital Phase Locked Loop (FDPLL96M)
External Interrupt Controller (EIC)
8 external interrupts
One non-maskable interrupt
Two-pin Serial Wire Debug (SWD) programming, test and debugging interface
Idle and standby sleep modes
SleepWalking peripherals
6-channel Direct Memory Access Controller (DMAC)
6-channel Event System
One 16-bit TC with compare/capture channels
One 8-bit TC with compare/capture channels
One 32-bit TC with compare/capture channels, by using two TCs
Up to four compare channels with optional complementary output
Generation of synchronized pulse width modulation (PWM) pattern across port pins
Deterministic fault protection, fast decay and configurable dead-time between complementary output
Dithering that increase resolution with up to 5 bit and reduce quantization error
32-bit Real Time Counter (RTC) with clock/calendar function
Watchdog Timer (WDT)
CRC-32 generator
Embedded device function
Eight endpoints
Can run from internal RC oscillator
USART with full-duplex and single-wire half-duplex configuration
I2C Bus up to 3.4MHz
SMBUS/PMBUS
SPI
LIN client
Differential and single-ended input
1/2x to 16x programmable gain stage
Automatic offset and gain error compensation
Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution
10-bit, 350ksps Digital-to-Analog Converter (DAC)
Two Analog Comparators (AC) with window compare function
Up to 72-channel capacitive touch and proximity sensing
Up to 22 GPIO pins
24-pin QFN
20-pin SOIC
20-ball WLCSP
1.62V – 3.63V

Spezifikationen

Source Content uid	ATSAMD11D14A-MUT	Pbfree Code	Yes
Part Life Cycle Code	Active	Reach Compliance Code	compliant
ECCN Code	3A991.A.2	HTS Code	8542.31.00.01
Factory Lead Time	52 Weeks	Has ADC	YES
Additional Feature	ALSO HAVING BOD, AT THIS SUPPLY BOD IS DISABLED.	Address Bus Width
Bit Size	32	Boundary Scan	NO
CPU Family	CORTEX-M0	Clock Frequency-Max	32 MHz
DAC Channels	YES	DMA Channels	YES
External Data Bus Width		Format	FIXED POINT
Integrated Cache	YES	JESD-30 Code	S-XQCC-N24
Length	4 mm	Low Power Mode	YES
Number of DMA Channels	6	Number of External Interrupts	8
Number of I/O Lines	22	Number of Serial I/Os	1
Number of Terminals	24	Number of Timers	2
On Chip Data RAM Width	8	On Chip Program ROM Width	8
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
PWM Channels	YES	Qualification Status	Not Qualified
RAM (bytes)	4096	ROM (words)	16384
ROM Programmability	FLASH	Seated Height-Max	0.9 mm
Speed	48 MHz	Supply Current-Max	4.13 mA
Supply Voltage-Max	3.63 V	Supply Voltage-Min	1.62 V
Supply Voltage-Nom	3.3 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	INDUSTRIAL
Terminal Form	NO LEAD	Terminal Pitch	0.5 mm
Terminal Position	QUAD	Width	4 mm
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..