Bezahlverfahren
ATSAMD20J15B-MZ +BOM
ARM Microcontrollers - MCU
VQFN-64-
Hersteller:
-
Herstellerteil #:
ATSAMD20J15B-MZ
-
Datenblatt:
-
Paket/Koffer:
VQFN-64
-
Produktart:
-
EDA/CAD Modelle:
Senden Sie alle Stücklisten an [email protected], oder füllen Sie das untenstehende Formular aus, um ein Angebot für ATSAMD20J15B-MZ zu erhalten. Garantierte Antwort innerhalb 12hr.
Verfügbarkeit: 9582 Stck
Bitte füllen Sie das kurze Formular unten aus und wir werden Ihnen umgehend ein Angebot zukommen lassen..
ATSAMD20J15B-MZ Allgemeine Beschreibung
A low-power, high-performance Microchip's ARM® Cortex®-M0+ based flash microcontroller, the ATSAMD20J15 is ideal for a wide range of home automation, consumer, metering, and industrial applications. It features:
- 32KB of flash and 4KB of SRAM
- Up to 48MHz operating frequency
- Six serial communication modules (SERCOM) configurable as UART/USART, SPI or I2C, eight 16-bit timer/counters, 32-bit Real Time clock and calendar, 16 PWM channels, one 20-channel 12-bit ADC, one 10-bit DAC
- Support for up to 256 touch channels
- 1.62V to 3.63V power supply
- Easy pin migration to SAMD20E and SAMD20G devices
Supported by MPLAB X IDE and MPLAB Harmony.
Hauptmerkmale
- ARM Cortex-M0+ CPU running at up to 48MHz
- Single-cycle hardware multiplier
- 32KB in-system self-programmable Flash
- 4KB SRAM memory
- Power-on reset (POR) and brown-out detection (BOD)
- Internal and external clock options with 48MHdigital frequency locked loop (DFLL48M) and 48MHz to 96MHz
- fractional digital phase locked loop (FDPLL96M)
- External interrupt controller (EIC)
- 16 external interrupts
- One non-maskable interrupt
- Two-pin serial wire debug (SWD) programming, test and debugging interface
- Idle and standby sleep modes
- SleepWalking peripherals
- 8-channel event system
- One 16-bit TC with compare/capture channels
- One 8-bit TC with compare/capture channels
- One 32-bit TC with compare/capture channels, by using two TCs
- 32-bit real time counter (RTC) with clock/calendar function
- Watchdog timer (WDT)
- CRC-32 generator
- USART with full-duplex and single-wire half-duplex configuration
- I2C up to 40kHz
- SPI
- Differential and single-ended input
- 1/2x to 16x programmable gain stage
- Automatic offset and gain error compensation
- Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution
- 10-bit, 350ksps digital-to-analog converter (DAC)
- Two analog comparators (AC) with window compare function
- 256-channel capacitive touch and proximity sensing
- 52 GPIO pins
- 64-pin TQFP, QFN
- 64-ball UFBGA
- 1.62V to 3.63V
- Down to 70µA/MHz in active mode
- Down to 8µA running the peripheral Touch Controller
- –40 to +105°C
Servicerichtlinien und andere
After-Sales- und Abwicklungsbezogen
Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:
[email protected]Versandart
AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..
365-Tage-Produkt
Qualitätsgarantie
Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.
In Stock: 9.582
Minimum Order: 1
Menge. | Einzelpreis | Ext. Preis |
---|---|---|
1+ | - | - |
Die unten angegebenen Preise dienen nur als Referenz.