Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

ATTINY2313-20MU +BOM

This MCU operates at both 3.3V and 5V, making it versatile for various projects

Hersteller:

Microchip Technology
Herstellerteil #:

ATTINY2313-20MU
Datenblatt:

ATTINY2313-20MU Datenblatt (PDF)
Series:

AVR® ATtiny
Programmabe:

Not Verified
Core Processor:

AVR
Core Size:

8-Bit

ATTINY2313-20MU Allgemeine Beschreibung

The ATTINY2313-20MU is a highly versatile microcontroller chip designed by Atmel, offering a range of features to support various applications. With its 2KB of flash memory, 128 bytes of EEPROM, and 128 bytes of SRAM, the chip provides ample storage for program, data, and temporary working memory. At a maximum speed of 20MHz and a wide voltage range of 2.7V to 5.5V, the ATTINY2313-20MU offers flexibility in power requirements, making it suitable for a wide range of projects

Hauptmerkmale

Utilizes the AVR® RISC Architecture
AVR – High-performance and Low-power RISC Architecture
– 120 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
Data and Non-volatile Program and Data Memories
– 2K Bytes of In-System Self Programmable Flash
Endurance 10,000 Write/Erase Cycles
– 128 Bytes In-System Programmable EEPROM
Endurance: 100,000 Write/Erase Cycles
– 128 Bytes Internal SRAM
– Programming Lock for Flash Program and EEPROM Data Security
Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Modes
– Four PWM Channels
– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– USI – Universal Serial Interface
– Full Duplex USART
Special Microcontroller Features
– debugWIRE On-chip Debugging
– In-System Programmable via SPI Port
– External and Internal Interrupt Sources
– Low-power Idle, Power-down, and Standby Modes
– Enhanced Power-on Reset Circuit
– Programmable Brown-out Detection Circuit
– Internal Calibrated Oscillator
I/O and Packages
– 18 Programmable I/O Lines
– 20-pin PDIP, 20-pin SOIC, 20-pad QFN/MLF
Operating Voltages
– 1.8 – 5.5V (ATtiny2313V)
– 2.7 – 5.5V (ATtiny2313)
Speed Grades
– ATtiny2313V: 0 – 4 MHz @ 1.8 - 5.5V, 0 – 10 MHz @ 2.7 – 5.5V
– ATtiny2313: 0 – 10 MHz @ 2.7 - 5.5V, 0 – 20 MHz @ 4.5 – 5.5V
Typical Power Consumption
– Active Mode
1 MHz, 1.8V: 230 µA
32 kHz, 1.8V: 20 µA (including oscillator)
– Power-down Mode
<0.1 µA at 1.8V

Spezifikationen

Series	AVR® ATtiny	Programmabe	Not Verified
Core Processor	AVR	Core Size	8-Bit
Speed	20MHz	Connectivity	SPI, UART/USART
Peripherals	Brown-out Detect/Reset, POR, PWM, WDT	Number of I/O	18
Program Memory Size	2KB (1K x 16)	Program Memory Type	FLASH
EEPROM Size	128 x 8	RAM Size	128 x 8
Voltage - Supply (Vcc/Vdd)	2.7V ~ 5.5V	Oscillator Type	Internal
Operating Temperature	-40°C ~ 85°C (TA)	Mounting Type	Surface Mount
Base Product Number	ATTINY2313

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..