Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

ATTINY26-16SI +BOM

Compact and efficient, this SOIC-20-based MCU is ideal for IoT, robotics, and other applications demanding high-performance at reduced sizes

Hersteller:

Microchip Technology
Herstellerteil #:

ATTINY26-16SI
Datenblatt:

ATTINY26-16SI Datenblatt (PDF)
Series:

AVR® ATtiny
Programmabe:

Not Verified
Core Processor:

AVR
Core Size:

8-Bit
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an ATTINY26-16SI

ATTINY26-16SI Allgemeine Beschreibung

In conclusion, the ATTINY26-16SI microcontroller is a cost-effective and compact solution for a wide range of applications. From consumer electronics to industrial control systems, its diverse features and small footprint make it a valuable component for projects where space and power efficiency are key considerations.Upgrade your project with the ATTINY26-16SI microcontroller and experience enhanced performance and versatility in your designs

Hauptmerkmale

High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
– 123 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
Non-volatile Program and Data Memories
– 2/4/8K Byte of In-System Programmable Program Memory Flash (ATtiny261/461/861) Endurance: 10,000 Write/Erase Cycles
– 128/256/512 Bytes In-System Programmable EEPROM (ATtiny261/461/861) Endurance: 100,000 Write/Erase Cycles
– 128/256/512 Bytes Internal SRAM (ATtiny261/461/861)
– Programming Lock for Self-Programming Flash Program and EEPROM Data Security
Peripheral Features
– 8/16-bit Timer/Counter with Prescaler and Two PWM Channels
– 8/10-bit High Speed Timer/Counter with Separate Prescaler
3 High Frequency PWM Outputs with Separate Output Compare Registers Programmable Dead Time Generator
– Universal Serial Interface with Start Condition Detector
– 10-bit ADC
11 Single Ended Channels
16 Differential ADC Channel Pairs
15 Differential ADC Channel Pairs with Programmable Gain (1x, 8x, 20x, 32x)
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
Special Microcontroller Features
– debugWIRE On-chip Debug System
– In-System Programmable via SPI Port
– External and Internal Interrupt Sources
– Low Power Idle, ADC Noise Reduction, and Power-down Modes
– Enhanced Power-on Reset Circuit
– Programmable Brown-out Detection Circuit
– Internal Calibrated Oscillator
I/O and Packages
– 16 Programmable I/O Lines
– 20-pin PDIP, 20-pin SOIC and 32-pad MLF
Operating Voltage:
– 1.8 - 5.5V for ATtiny261V/461V/861V
– 2.7 - 5.5V for ATtiny261/461/861
Speed Grade:
– ATtiny261V/461V/861V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
– ATtiny261/461/861: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
Industrial Temperature Range
Low Power Consumption
– Active Mode: 1 MHz, 1.8V: 380μA
– Power-down Mode: 0.1μA at 1.8V

Spezifikationen

Series	AVR® ATtiny	Programmabe	Not Verified
Core Processor	AVR	Core Size	8-Bit
Speed	16MHz	Connectivity	USI
Peripherals	Brown-out Detect/Reset, POR, PWM, WDT	Number of I/O	16
Program Memory Size	2KB (1K x 16)	Program Memory Type	FLASH
EEPROM Size	128 x 8	RAM Size	128 x 8
Voltage - Supply (Vcc/Vdd)	4.5V ~ 5.5V	Data Converters	A/D 11x10b
Oscillator Type	Internal	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	ATTINY26

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..