Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

ATTINY26L-8SI +BOM

The ATTINY26L-8SI is a compact 8-bit microcontroller with advanced features such as 2K of flash memory

Hersteller:

Microchip
Herstellerteil #:

ATTINY26L-8SI
Datenblatt:

ATTINY26L-8SI Datenblatt (PDF)
Series:

ATtiny26
Mounting Style:

SMD/SMT
Core:

AVR
Program Memory Size:

2 kB
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an ATTINY26L-8SI

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ATTINY26L-8SI Allgemeine Beschreibung

Whether used in industrial control systems, consumer electronics, or automotive applications, the ATTINY26L-8SI offers the flexibility and efficiency required for modern embedded designs. Its blend of low power operation, rich feature set, and compact size make it a compelling solution for engineers seeking to optimize performance and energy efficiency in their designs

Hauptmerkmale

High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
– 123 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
Non-volatile Program and Data Memories
– 2/4/8K Byte of In-System Programmable Program Memory Flash (ATtiny261/461/861) Endurance: 10,000 Write/Erase Cycles
– 128/256/512 Bytes In-System Programmable EEPROM (ATtiny261/461/861) Endurance: 100,000 Write/Erase Cycles
– 128/256/512 Bytes Internal SRAM (ATtiny261/461/861)
– Programming Lock for Self-Programming Flash Program and EEPROM Data Security
Peripheral Features
– 8/16-bit Timer/Counter with Prescaler and Two PWM Channels
– 8/10-bit High Speed Timer/Counter with Separate Prescaler
3 High Frequency PWM Outputs with Separate Output Compare Registers Programmable Dead Time Generator
– Universal Serial Interface with Start Condition Detector
– 10-bit ADC
11 Single Ended Channels
16 Differential ADC Channel Pairs
15 Differential ADC Channel Pairs with Programmable Gain (1x, 8x, 20x, 32x)
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
Special Microcontroller Features
– debugWIRE On-chip Debug System
– In-System Programmable via SPI Port
– External and Internal Interrupt Sources
– Low Power Idle, ADC Noise Reduction, and Power-down Modes
– Enhanced Power-on Reset Circuit
– Programmable Brown-out Detection Circuit
– Internal Calibrated Oscillator
I/O and Packages
– 16 Programmable I/O Lines
– 20-pin PDIP, 20-pin SOIC and 32-pad MLF
Operating Voltage:
– 1.8 - 5.5V for ATtiny261V/461V/861V
– 2.7 - 5.5V for ATtiny261/461/861
Speed Grade:
– ATtiny261V/461V/861V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
– ATtiny261/461/861: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
Industrial Temperature Range
Low Power Consumption
– Active Mode: 1 MHz, 1.8V: 380μA
– Power-down Mode: 0.1μA at 1.8V

Spezifikationen

Product Category	8-bit Microcontrollers - MCU	Series	ATtiny26
Mounting Style	SMD/SMT	Core	AVR
Program Memory Size	2 kB	Data Bus Width	8 bit
ADC Resolution	10 bit	Maximum Clock Frequency	8 MHz
Number of I/Os	16 I/O	Data RAM Size	128 B
Supply Voltage - Min	2.7 V	Supply Voltage - Max	5.5 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Data RAM Type	SRAM	Data ROM Size	128 B
Data ROM Type	EEPROM	Height	2.37 mm
Interface Type	ISP, SPI, UART, USI	Length	13 mm
Number of ADC Channels	11 Channel	Number of Timers/Counters	2 Timer
Processor Series	tinyAVR	Product	MCU
Product Type	8-bit Microcontrollers - MCU	Program Memory Type	Flash
Factory Pack Quantity	37	Subcategory	Microcontrollers - MCU
Tradename	AVR	Width	7.6 mm
Unit Weight	0.028254 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..