Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

ATXMEGA128B1-AU +BOM

Green, 1.62-3.6V

Hersteller:

Microchip
Herstellerteil #:

ATXMEGA128B1-AU
Datenblatt:

ATXMEGA128B1-AU Datenblatt (PDF)
Core:

AVR
Program Memory Size:

128 kB
Data RAM Size:

8 kB
Maximum Clock Frequency:

32 MHz
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an ATXMEGA128B1-AU

ATXMEGA128B1-AU Allgemeine Beschreibung

Despite its powerful performance capabilities, the ATXMEGA128B1-AU remains energy-efficient, striking the perfect balance between power and efficiency. Whether you're designing a portable device or aiming to reduce your energy consumption, this microcontroller is up to the task. And with its compact 44-pin TQFP package, integrating this chip into space-constrained designs is a breeze. Say goodbye to bulky components and hello to sleek, streamlined designs with the ATXMEGA128B1-AU

Hauptmerkmale

High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller
Nonvolatile program and data memories
64K - 128KBytes of in-system self-programmable flash
4K - 8KBytes boot section
2KBytes EEPROM
4K - 8KBytes internal SRAM
Peripheral Features
Two-channel DMA controller
Four-channel event system
Three 16-bit timer/counters
Two timer/counters with 4 output compare or input capture channels
One timer/counter with 2 output compare or input capture channels
High resolution extensions one timer/counter
Advanced waveform extension (AWeX) on one timer/counter
Split mode on two timer/counters
One USB device interface
USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant
32 Endpoints with full configuration flexibility
Two USARTs with IrDA support for one USART
AES and DES crypto engine
CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator
One two-wire interface with dual address match (I2C and SMBus compatible)
One serial peripheral interface (SPI)
16-bit Real Time Counter (RTC) with separate oscillator
Liquid Crystal Display
Up to 4x40 segment driver
Built in contrast control
ASCII character mapping
Flexible SWAP of segment and common terminals buses
Two eight-channel, 12-bit, 300 thousand SPS Analog to Digital Converters
Four Analog Comparators with window compare function, and current source feature
External interrupts on all General Purpose I/O pins
Programmable watchdog timer with separate on-chip ultra low power oscillator
QTouch® library support
Capacitive touch buttons, sliders and wheels
Special microcontroller features
Power-on reset and programmable brown-out detection
Internal and external clock options with PLL
Programmable multilevel interrupt controller
Five sleep modes
Programming and debug interfaces
JTAG (IEEE 1149.1 Compliant) interface, including boundary scan
PDI (Program and Debug Interface)
I/O and Packages
53 Programmable I/O pins
100-lead TQFP
Operating Voltage
1.6 – 3.6V
Operating frequency
0 – 12MHz from 1.6V
0 – 32MHz from 2.7V

Spezifikationen

Product Category	8-bit Microcontrollers - MCU	Core	AVR
Program Memory Size	128 kB	Data RAM Size	8 kB
Maximum Clock Frequency	32 MHz	ADC Resolution	12 bit
Number of I/Os	53 I/O	Supply Voltage - Min	1.6 V
Supply Voltage - Max	3.6 V	Mounting Style	SMD/SMT
Data Bus Width	8 bit/16 bit	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Series	XMEGA B1
Packaging	[ "Tray" ]	Data ROM Size	2 kB
Moisture Sensitive	Yes	Number of Timers/Counters	3 Timer
Processor Series	AVR XMEGA	Product	MCUs
Product Type	8-bit Microcontrollers - MCU	Factory Pack Quantity	90
Subcategory	Microcontrollers - MCU	Tradename	XMEGA
Unit Weight	0.023175 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..