Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

AWR1843ABGABLQ1 +BOM

Single-chip 76-GHz to 81-GHz automotive radar sensor integrating DSP, MCU and radar accelerator

Hersteller:

Texas Instruments, Inc
Herstellerteil #:

AWR1843ABGABLQ1
Datenblatt:

AWR1843ABGABLQ1 Datenblatt (PDF)
Frequency Range:

76 - 81 GHz
Number Of Receivers:

4
Number Of Transmitters:

3
ADC Sampling Rate (max) (Msps):

25
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an AWR1843ABGABLQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AWR1843ABGABLQ1 Allgemeine Beschreibung

Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor. Moreover, the device is provided as a complete platform solution, including TI reference designs, software drivers, sample configurations, API guides, and user documentation, making it highly versatile and easy to implement

Hauptmerkmale

FMCW transceiver
- Integrated PLL, transmitter, receiver, Baseband, and ADC
- 76- to 81-GHz coverage with 4 GHz available bandwidth
- Four receive channels
- Three transmit channels
- Ultra-accurate chirp engine based on fractional-N PLL
- TX power: 12 dBm
- RX noise figure:
  - 14 dB (76 to 77 GHz)
  - 15 dB (77 to 81 GHz)
- Phase noise at 1 MHz:
  - –95 dBc/Hz (76 to 77 GHz)
  - –93 dBc/Hz (77 to 81 GHz)
Built-in calibration and self-test (monitoring)
- Arm Cortex-R4F-based radio control system
- Built-in firmware (ROM)
- Self-calibrating system across process and temperature
C674x DSP for FMCW signal processing
On-chip Memory: 2MB
Cortex-R4F microcontroller for object tracking and classification, AUTOSAR, and interface control
- Supports autonomous mode (loading user application from QSPI flash memory)
Integrated peripherals
- Internal memories With ECC
Host interface
- CAN and CAN-FD
Other interfaces available to user application
- Up to 6 ADC channels
- Up to 2 SPI channels
- Up to 2 UARTs
- I 2C
- GPIOs
- 2-lane LVDS interface for raw ADC data and debug instrumentation
Device Security ( on select part numbers)
- Secure authenticated and encrypted boot support
- Customer programmable root keys, symmetric keys (256 bit), Asymmetric keys (up to RSA-2K) with Key revocation capability
- Crypto software accelerators - PKA , AES (up to 256 bit), SHA (up to 256 bit), TRNG/DRGB
Functional Safety-Compliant
- Developed for functional safety applications
- Documentation available to aid ISO 26262 functional safety system design up to ASIL-D
- Hardware integrity up to ASIL-B
- Safety-related certification
  - ISO 26262 certified upto ASIL B by TUV SUD
AEC-Q100 qualified
Device advanced features
- Embedded self-monitoring with no host processor involvement
- Complex baseband architecture
- Embedded interference detection capability
- Programmable phase rotators in transmit path to enable beam forming
Power management
- Built-in LDO network for enhanced PSRR
- I/Os support dual voltage 3.3 V/1.8 V
Clock source
- Supports external oscillator at 40 MHz
- Supports externally driven clock (square/sine) at 40 MHz
- Supports 40 MHz crystal connection with load capacitors
Easy hardware design
- 0.65-mm pitch, 161-pin 10.4 mm × 10.4 mm flip chip BGA package for easy assembly and low-cost PCB design
- Small solution size
Operating Conditions
- Junction temp range: –40°C to 125°C

Spezifikationen

Frequency range	76 - 81 GHz	Number of receivers	4
Number of transmitters	3	ADC sampling rate (max) (Msps)	25
Arm CPU	ARM-Cortex R4F 200MHz	Interface type	CAN, CAN-FD, I2C
DSP type	C674x DSP 600MHz	Hardware accelerators	Radar hardware accelerator
RAM (kByte)	2048	Rating	Automotive
Operating temperature range (°C)	-40 to 125	TI functional safety category	Functional Safety-Compliant
Power supply solution	LP87524B-Q1, LP87524J-Q1, LP87524P-Q1, LP87745-Q1	Security	Cryptographic acceleration, Device identity/keys, Secure boot, Secure software update, Software IP protection
feature-packaging	Tray	feature-rad-hard
feature-pin-count	161	feature-cecc-qualified
feature-esd-protection		feature-military	No
feature-aec-qualified	Yes	feature-aec-qualified-number	AEC-Q100
feature-eccn-code	EAR99	feature-svhc
feature-svhc-exceeds-threshold	No

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..