Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

CS4207-DNZ +BOM

Multi-channel 24-bit codec

Hersteller:

Cirrus Logic Inc.
Herstellerteil #:

CS4207-DNZ
Datenblatt:

CS4207-DNZ Datenblatt (PDF)
Type:

Audio, HD
Data Interface:

Serial
Resolution (Bits):

24 b
Number Of ADCs / DACs:

2 / 3
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an CS4207-DNZ

CS4207-DNZ Allgemeine Beschreibung

Audio, HD Interface 24 b Serial 48-QFN-EP (6x6)

Hauptmerkmale

DAC1 (Headphone)
– 101 dB Dynamic Range (A-wtd)
– -89 dB THD+N
Headphone Amplifier - GND Centered
– Integrated Negative-voltage Regulator
– No DC-blocking Capacitor Required
– 50 mW Power/Channel into 16
DAC2 & DAC3 (Line Outs)
– 110 dB Dynamic Range (A-wtd)
– -94 dB THD+N
– Differential Balanced or Single-ended
Each DAC Supports 32 kHz to 192 kHz Sample Rates Independently.
Digital Volume Control
– +6.0 dB to -57.5 dB in 0.5 dB Steps
– Zero Cross and/or Soft Ramp Transitions
Independent Support of D0 and D3 Power States for Each DAC
Fast D3 to D0 Transition
– Audio Playback in Less Than 50 ms
ANALOG to DIGITAL FEATURES
ADC1 & ADC2
– 105 dB Dynamic Range (A-wtd)
– -88 dB THD+N
– Differential Balanced or Single-ended Inputs
– Analog Programmable Gain Amplifier (PGA) ±12 dB, 1.0 dB Steps, with Zero Cross Transitions and Mute
MIC Inputs
– Pre-amplifier with Selectable 0 dB, +10 dB, +20 dB, and +30 dB Gain Settings
– Programmable, Low-noise MIC Bias Level
Each ADC Supports 8 kHz to 96 kHz Sample Rates Independently
Additional Digital Attenuation Control
– -13.0 dB to -51.0 dB in 1.0 dB steps
– Zero Cross and/or Soft Ramp Transitions
Digital Interface for Two Dual Digital Mic Inputs
Independent Support of D0 and D3 Power States for Each ADC
System Features
Very Low D3 Power Dissipation of <7 mW
– Jack Detect Active in D3
– HDA BITCLK Not Required for D3 State
Jack Detect Does Not Require HDA Bus BITCLK
All Configuration Settings are Preserved in D3 State
Pop/Click Suppression in State Transitions
Detects Wake Event and Generates Power State Change Request when HDA Bus Controller is in D3
Variable Power Supplies
– 1.5 V to 1.8 V Digital Core Voltage
– 3.3 V to 5.0 V Analog Core Voltage
– 3.3 V to 5.0 V Headphone Drivers
– 1.5 V to 3.3 V HD Bus Interface Logic
– 3.3 V Interface Logic levels for GPIO, S/PDIF, and Digital Mic
Individual Power-down Managed
– ADCs, DACs, PGAs, Headphone Driver, S/PDIF Receiver, and Transmitters

Spezifikationen

Type	Audio, HD	Data Interface	Serial
Resolution (Bits)	24 b	Number of ADCs / DACs	2 / 3
Sigma Delta	Yes	S/N Ratio, ADCs / DACs (db) Typ	-
Dynamic Range, ADCs / DACs (db) Typ	105 / 110	Voltage - Supply, Analog	2.97V ~ 5.25V
Voltage - Supply, Digital	2.97V ~ 5.25V	Operating Temperature	-40°C ~ 105°C
Mounting Type	Surface Mount	Base Product Number	CS4207

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..