Bezahlverfahren
CXP82832 +BOM
The CXP82832 microcontroller is designed for high-performance computing tasks with its advanced CMOS technology."
QFP100-
Hersteller:
SONY CORP
-
Herstellerteil #:
CXP82832
-
Datenblatt:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Active
-
Pin Count:
100
-
HTS Code:
8542.31.00.01
-
EDA/CAD Modelle:
Verfügbarkeit: 7072 Stck
Bitte füllen Sie das kurze Formular unten aus und wir werden Ihnen umgehend ein Angebot zukommen lassen..
CXP82832 Allgemeine Beschreibung
DescriptionThe CXP82832/82840/82852/82860 is a CMOS 8-bit single chip microcomputer integrating on a single chip an A/D converter, serial interface, timer/counter, time base timer, capture timer/counter, fluorescent display panel controller/driver, remote control reception circuit, and PWM output besides the basic configurations of 8-bit CPU, ROM, RAM, and I/O port.Features• Wide-range instruction system (213 instructions) to cover various types of data— 16-bit arithmetic/multiplication and division/boolean bit operation instructions• Minimum instruction cycle 400ns at 10MHz operation (122µs at 32kHz operation)• Incorporated ROM capacity 32K bytes (CXP82832) 40K bytes (CXP82840) 52K bytes (CXP82852) 60K bytes (CXP82860)• Incorporated RAM capacity 1536 bytes (including fluorescent display area)• Peripheral functions— A/D converter 8 bits, 8 channels, successive approximation method(Conversion time of 32µs/10MHz)— Serial interface 8-bit, 8-stage FIFO incorporated (Auto transfer for 1 to 8 bytes), 1 channel 8-bit clock synchronized type, 1 channel— Timers 8-bit timer, 8-bit timer/counter, 19-bit time base timer 16-bit capture timer/counter, 32kHz timer/counter— Fluorescent display panel controller/driver Supports the universal grid fluorescent display panel. High voltage drive output port of 56 pins (40V) Maximum of 640 segments display possibleDisplay timing number of 1 to 20 Dimmer function Incorporated pull-down resistor (Mask option) Hardware key scan function (Maximum of 16 × 8 key matrix supportable)— Remote control reception circuit 8-bit pulse measurement counter, 6-stage FIFO— PWM output 14 bits, 1 channel• Interruption 16 factors, 15 vectors, multi-interruption possible• Standby mode SLEEP/STOP• Package 100-pin plastic QFP• Piggyback/evaluation chip CXP82800 100-pin ceramic QFP
Hauptmerkmale
- Wide-range instruction system (213 instructions) to cover various types of data
- — 16-bit arithmetic/multiplication and division/boolean bit operation instructions
- Minimum instruction cycle 400ns at 10MHz operation
- (122µs at 32kHz operation)
- Incorporated ROM capacity
- 32K bytes (CXP82832)
- 40K bytes (CXP82840)
- 52K bytes (CXP82852)
- 60K bytes (CXP82860)
- Incorporated RAM capacity 1536 bytes (including fluorescent display area)
- Peripheral functions
- — A/D converter
- 8 bits, 8 channels, successive approximation method(Conversion time of 32µs/10MHz)
- — Serial interface
- 8-bit, 8-stage FIFO incorporated (Auto transfer for 1 to 8 bytes), 1 channel 8-bit clock synchronized type, 1 channel
- — Timers
- 8-bit timer, 8-bit timer/counter, 19-bit time base timer 16-bit capture timer/counter, 32kHz timer/counter
- — Fluorescent display panel controller/driver
- Supports the universal grid fluorescent display panel. High voltage drive output port of 56 pins (40V) Maximum of 640 segments display possibleDisplay timing number of 1 to 20 Dimmer function Incorporated pull-down resistor (Mask option) Hardware key scan function (Maximum of 16 × 8 key matrix supportable)
- — Remote control reception circuit
- 8-bit pulse measurement counter, 6-stage FIFO
- — PWM output
- 14 bits, 1 channel
- Interruption 16 factors, 15 vectors, multi-interruption possible
- Standby mode SLEEP/STOP
- Package 100-pin plastic QFP
- Piggyback/evaluation chip CXP82800 100-pin ceramic QFP
Spezifikationen
Pbfree Code | Yes | Part Life Cycle Code | Active |
Pin Count | 100 | Reach Compliance Code | |
HTS Code | 8542.31.00.01 | Has ADC | YES |
Address Bus Width | Bit Size | 8 | |
Clock Frequency-Max | 10 MHz | DAC Channels | NO |
DMA Channels | NO | External Data Bus Width | |
JESD-30 Code | R-PDSO-G100 | JESD-609 Code | e6/e4 |
Length | 20 mm | Number of I/O Lines | 64 |
Number of Terminals | 100 | Operating Temperature-Max | 75 °C |
Operating Temperature-Min | -20 °C | PWM Channels | YES |
Peak Reflow Temperature (Cel) | 260 | Qualification Status | Not Qualified |
ROM Programmability | MROM | Supply Voltage-Max | 5.5 V |
Supply Voltage-Min | 4.5 V | Supply Voltage-Nom | 5 V |
Surface Mount | YES | Technology | CMOS |
Temperature Grade | COMMERCIAL EXTENDED | Terminal Finish | TIN BISMUTH/PALLADIUM |
Terminal Form | GULL WING | Terminal Pitch | 0.65 mm |
Terminal Position | QUAD | Time@Peak Reflow Temperature-Max (s) | 10 |
Width | 14 mm | uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
Servicerichtlinien und andere
After-Sales- und Abwicklungsbezogen
Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:
[email protected]Versandart
AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..
365-Tage-Produkt
Qualitätsgarantie
Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.
In Stock: 7.072
Minimum Order: 1
Menge. | Einzelpreis | Ext. Preis |
---|---|---|
1+ | - | - |
Die unten angegebenen Preise dienen nur als Referenz.
Alle Stücklisten (BOM) können per E-Mail gesendet werden an [email protected], oder füllen Sie das untenstehende Formular aus, um ein Angebot für CXP82832 zu erstellen, garantierte Angebote zurück innerhalb 12 Std.