Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

FNF51060TD1 +BOM

Intelligent Power Module, 600 V, 10A

Hersteller:

ON Semiconductor, LLC
Herstellerteil #:

FNF51060TD1
Datenblatt:

FNF51060TD1 Datenblatt (PDF)
MSL Temp (°C):

0
Container Type:

TUBE
Product:

Brushless DC Motor Controllers
Type:

3 Phase

FNF51060TD1 Allgemeine Beschreibung

FNF51060TD1 is a Motion SPM 55 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, inter-lock function, over-current shutdown,thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's robust shortcircuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.

Hauptmerkmale

UL Certified No. E209204 (UL1557)
600 V - 10 A 3-Phase IGBT Inverter Including Control IC for Gate Drive and Protections
Low-Loss, Short-Circuit Rated IGBTs
Built-In Bootstrap Diodes in HVIC
Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
Active-HIGH interface, works with 3.3 / 5 V Logic, Schmitt-trigger Input
HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection
Fault Output for Under-Voltage and Short-Circuit Current Protection
Inter-Lock Function to Prevent Short-Circuit
Shut-Down Input
HVIC Temperature-Sensing Built-In for Temperature Monitoring
Optimized for 15 - 20 kHz Switching Frequency
Isolation Rating: 1500 V_rms / min.

Anwendung

Motion Control - Home Appliance/Industrial Motor

Spezifikationen

Status	Obsolete	Case Outline
MSL Temp (°C)	0	Container Type	TUBE
Product Category:	Motor / Motion / Ignition Controllers & Drivers	Product:	Brushless DC Motor Controllers
Type:	3 Phase	Operating Supply Voltage:	300 V
Output Current:	10 A	Operating Supply Current:	2 mA
Minimum Operating Temperature:	- 40 C	Maximum Operating Temperature:	+ 150 C
Mounting Style:	Through Hole	Load Voltage Rating:	300 V
Number of Outputs:	3 Output	Operating Frequency:	20 kHz
Output Voltage:	600 V	Pd - Power Dissipation:	21 W
Product Type:	Motor / Motion / Ignition Controllers & Drivers	Series:	SPM 55
Factory Pack Quantity:	78	Subcategory:	PMIC - Power Management ICs
Unit Weight:	0.201138 oz	feature-type	IGBT
feature-maximum-power-dissipation-mw	21	feature-packaging	Tube
feature-rad-hard		feature-pin-count	20
feature-cecc-qualified	No	feature-esd-protection
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	EAR99
feature-svhc	Yes	feature-svhc-exceeds-threshold	Yes

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..