Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

FT232RL-TUBE +BOM

USB Bridge, USB to UART USB 2.0 UART Interface 28-SSOP

Hersteller:

FTDI
Herstellerteil #:

FT232RL-TUBE
Datenblatt:

FT232RL-TUBE Datenblatt (PDF)
Series:

FT232
Product:

USB Converters
Type:

Bridge, USB to UART
Mounting Style:

SMD/SMT
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an FT232RL-TUBE

FT232RL-TUBE Allgemeine Beschreibung

The FT232RL-TUBE is a game-changing USB to serial UART interface IC that simplifies the connection between devices and a computer. With its tube packaging, engineers and enthusiasts can easily store and handle this essential component. Its USB full-speed controller and support for various operating systems including Windows, Mac, and Linux, make it a versatile solution for a wide range of applications. From industrial to consumer electronics, the FT232RL-TUBE's small size and ease of use make it a go-to choice for developers and hobbyists seeking a trustworthy and efficient connectivity solution

Hauptmerkmale

Hardware Features
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip - No USB-specific firmware programming required.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Fully assisted hardware or X-On / X-Off software handshaking.
Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
256 byte receive buffer and 128 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases.
In-built support for event characters and line break condition.
New USB FTDIChip-ID™ feature.
New configurable CBUS I/O pins.
Auto transmit buffer control for RS485 applications.
Transmit and receive LED drive signals.
New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.
FIFO receive and transmit buffers for high data throughput.
Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.
New CBUS bit bang mode option.
Integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings, and CBUS I/O configuration.
Device supplied preprogrammed with unique USB serial number.
Support for USB suspend and resume.
Support for bus powered, self powered, and high power bus powered USB configurations.
Integrated 3.3V level converter for USB I/O .
Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
High I/O pin output drive option.
Integrated USB resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
UART signal inversion option.
USB bulk transfer mode.
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant).

Spezifikationen

Product Category	USB Interface IC	Series	FT232
Product	USB Converters	Type	Bridge, USB to UART
Mounting Style	SMD/SMT	Standard	USB 2.0
Speed	Full Speed	Data Rate	12 Mb/s
Supply Voltage - Min	3.3 V	Supply Voltage - Max	5.25 V
Operating Supply Current	15 mA	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Interface Type	UART, USB
Moisture Sensitive	Yes	Product Type	USB Interface IC
Factory Pack Quantity	47	Subcategory	Interface ICs
Tradename	R-CHIP	Unit Weight	0.025045 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..