Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

FXL4T245 +BOM

onsemi 4-BIT TRANSLATOR DIRECT

Hersteller:

onsemi
Herstellerteil #:

FXL4T245
Datenblatt:

FXL4T245 Datenblatt (PDF)
Packaging:

[ "Reel" ]
Factory Pack Quantity:

3000
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an FXL4T245

FXL4T245 Allgemeine Beschreibung

The FXL4T245 is a configurable dual-voltage-supply translator designed for bi-directional voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the V_CCA level, and the B Port tracks the V_CCB level. Both ports are designed to accept supply voltage levels from 1.1V to 3.6V. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V.
The device remains in 3-STATE until both V_CCs reach active levels allowing either V_CC to be powered-up first. The device also contains power down control circuits that place the device in 3-STATE if either V_CC is removed.
The Transmit/Receive (T/R#) input determines the direction of data flow through the device. The OE# input, when HIGH, disables both the A and B Ports by placing them in 3-STATE condition. The FXL4T245 is designed so that the control pins (T/R# and OE#) are supplied by V_CCA.

Hauptmerkmale

Bi-directional interface between any 2 levels from 1.1V to 3.6V
Fully configurable, inputs track V_CC level
Non-preferential power-up sequencing; either V_CC may be powered-up first
No power-up sequencing required
Outputs remain in 3-STATE until active V_CC level is reached
Outputs switch to 3-STATE if either V_CC is at GND
Power-off protection
Control inputs (T/R#, OE#) levels are referenced to V_CCA voltage
Packaged in 14-terminal DQFN (2.5mm x 3.0mm) package
ESD protection exceeds:
4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7)
8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7)
1kV CDM ESD (per ESD STM 5.3)
200V MM ESD (per JESD22-A115 & ESD STM5.2)

Anwendung

This product is general usage and suitable for many different applications.

Spezifikationen

Product Category	onsemi	Packaging	[ "Reel" ]
Factory Pack Quantity	3000

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..