Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

GD75232N +BOM

3/5 Transceiver Full RS232 20-PDIP

Hersteller:

Texas Instruments, Inc
Herstellerteil #:

GD75232N
Datenblatt:

GD75232N Datenblatt (PDF)
Series:

GD
Type:

Transceiver
Protocol:

RS232
Number Of Drivers/Receivers:

3/5
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an GD75232N

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

GD75232N Allgemeine Beschreibung

The GD65232 and GD75232 combine three drivers and five receivers from the Texas Instruments trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The pinout matches the flow-through design of the SN75C185 to decrease the part count, reduce the board space required, and allow easy interconnection of the UART and serial-port connector of an IBM. PC/AT and compatibles. The bipolar circuits and processing of the GD65232 and GD75232 provide a rugged, low-cost solution for this function at the expense of quiescent power and external passive components relative to the SN75C185.

The GD65232 and GD75232 comply with the requirements of the TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards. These standards are for data interchange between a host computer and a peripheral at signaling rates up to 20 kbit/s. The switching speeds of these devices are fast enough to support rates up to 120 kbit/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be expected unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates up to 120 kbit/s, use of TIA/EIA-423-B (ITU V.10) and TIA/EIA-422-B (ITU V.11) standards is recommended.

Hauptmerkmale

Single Chip With Easy Interface Between UART and
Serial-Port Connector of IBM™ PC/AT and Compatibles
Meet or Exceed the Requirements of TIA/EIA-232-F and ITU v.28 Standards
Designed to Support Data Rates up to 120 kbit/s
Pinout Compatible With SN75C185 and SN75185

Spezifikationen

Category	Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers	Series	GD
Type	Transceiver	Protocol	RS232
Number of Drivers/Receivers	3/5	Duplex	Full
Receiver Hysteresis	500 mV	Data Rate	120Kbps
Voltage - Supply	5V, ±7.5V ~ 15V	Operating Temperature	0°C ~ 70°C
Mounting Type	Through Hole	Base Product Number	GD75232

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..