Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

INA180A2QDBVRQ1 +BOM

AEC-Q100, 26V, 350kHz current sense amplifier

Hersteller:

Texas Instruments, Inc
Herstellerteil #:

INA180A2QDBVRQ1
Datenblatt:

INA180A2QDBVRQ1 Datenblatt (PDF)
Common-mode Voltage (max) (V):

26
Common-mode Voltage (min) (V):

-0.2
Input Offset (±) (max) (µV):

150
Input Offset Drift (±) (typ) (µV/°C):

0.2
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an INA180A2QDBVRQ1

INA180A2QDBVRQ1 Allgemeine Beschreibung

The INA180 -Q1, INA2180 -Q1, and INA4180 -Q1 (INAx180 -Q1) current sense amplifiers are designed for cost-optimized applications. These devices are part of a family of current-sense amplifiers (also called current-shunt monitors) that sense voltage drops across current-sense resistors at common-mode voltages from –0.2 V to +26 V, independent of the supply voltage. The INAx180 -Q1 integrate a matched resistor gain network in four, fixed-gain device options: 20 V/V, 50 V/V, 100 V/V, or 200 V/V. This matched gain resistor network minimizes gain error and reduces the temperature drift.

All these devices operate from a single 2.7-V to 5.5-V power supply. The single-channel INA180 -Q1 draws a maximum supply current of 260 µA; whereas, the dual-channel INA2180 -Q1 draws a maximum supply current of 500 µA, and the quad channel draws a maximum supply current of 900 µA.

The INA180 -Q1 is available in a 5-pin, SOT-23 package with two different pin configurations. The INA2180 -Q1 is available in a 8-pin, VSSOP package. The INA4180 -Q1 is available in a 14-pin, TSSOP package. All device options are specified over the extended operating temperature range of –40°C to +125°C.

Hauptmerkmale

AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C ≤ T_A ≤ +125°C
- HBM ESD classification level 2
- CDM ESD classification level C6
Functional Safety-Capable
- Documentation available to aid functional safety system design
Common-mode range (V_CM): –0.2 V to +26 V
High bandwidth: 350 kHz (A1 devices)
Offset voltage:
- ±150 µV (maximum) at V_CM = 0 V
- ±500 µV (maximum) at V_CM = 12 V
Output slew rate: 2 V/µs
Accuracy:
- ±1% gain error (maximum)
- 1-µV/°C offset drift (maximum)
Gain options:
- 20 V/V (A1 devices)
- 50 V/V (A2 devices)
- 100 V/V (A3 devices)
- 200 V/V (A4 devices)
Quiescent current: 260 µA maximum (INA180-Q1)

Spezifikationen

Product type	Analog output	Common-mode voltage (max) (V)	26
Common-mode voltage (min) (V)	-0.2	Input offset (±) (max) (µV)	150
Input offset drift (±) (typ) (µV/°C)	0.2	Voltage gain (V/V)	20, 50, 100, 200
CMRR (min) (dB)	84	Bandwidth (kHz)	105, 150, 210, 350
Supply voltage (max) (V)	5.5	Supply voltage (min) (V)	2.7
Iq (max) (mA)	0.3	Number of channels	1
Comparators (#)	0	Gain error (%)	0.8
Gain error drift (±) (max) (ppm/°C)	20	Slew rate (V/µs)	2
Features	Low-side Capable	Rating	Automotive
TI functional safety category	Functional Safety-Capable	Operating temperature range (°C)	-40 to 125
feature-type	Current Sense Amplifier	feature-number-of-elements-per-chip	2
feature-number-of-channels-per-chip	2	feature-rail-to-rail	Rail to Rail Output
feature-typical-gain-bandwidth-product-mhz		feature-maximum-voltage-gain-db	33.98(Typ)
feature-minimum-cmrr-db	84	feature-minimum-psrr-db	101.94(Typ)
feature-output-type		feature-maximum-input-offset-voltage-mv	0.5@5V
feature-maximum-input-bias-current-ua		feature-maximum-input-resistance-mohm
feature-maximum-power-dissipation-mw		feature-packaging	Tape and Reel
feature-rad-hard		feature-pin-count	5
feature-cecc-qualified	No	feature-esd-protection	Yes
feature-escc-qualified		feature-military	No
feature-aec-qualified	Yes	feature-aec-qualified-number	AEC-Q100
feature-auto-motive	Yes	feature-p-pap	Yes
feature-eccn-code	EAR99	feature-svhc	No
feature-svhc-exceeds-threshold	No

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..