Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

JM38510/10901BPA +BOM

Precision Timer

Hersteller:

TI
Herstellerteil #:

JM38510/10901BPA
Datenblatt:

JM38510/10901BPA Datenblatt (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Pin Count:

8
Reach Compliance Code:

not_compliant
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an JM38510/10901BPA

JM38510/10901BPA Allgemeine Beschreibung

These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor.

The threshold and trigger levels normally are two-thirds and one-third, respectively, of V_CC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground.

The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs.

Hauptmerkmale

Timing From Microseconds to Hours
Astable or Monostable Operation
Adjustable Duty Cycle
TTL-Compatible Output Can Sink or Source
Up to 200 mA
On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include
Testing of All Parameters.

Spezifikationen

Source Content uid	JM38510/10901BPA	Pbfree Code	Yes
Part Life Cycle Code	Active	Pin Count	8
Reach Compliance Code	not_compliant	ECCN Code	EAR99
HTS Code	8542.33.00.01	Additional Feature	CAN ALSO OPERATE FROM A 15V NOMINAL SUPPLY
Analog IC - Other Type	PULSE; RECTANGULAR	JESD-30 Code	R-GDIP-T8
JESD-609 Code	e0	Length	9.58 mm
Number of Functions	1	Number of Terminals	8
Operating Temperature-Max	125 °C	Operating Temperature-Min	-55 °C
Peak Reflow Temperature (Cel)	NOT SPECIFIED	Qualification Status	Not Qualified
Screening Level	MIL-M-38510	Seated Height-Max	5.08 mm
Supply Current-Max (Isup)	15 mA	Supply Voltage-Max (Vsup)	18 V
Supply Voltage-Min (Vsup)	4.5 V	Supply Voltage-Nom (Vsup)	5 V
Surface Mount	NO	Temperature Grade	MILITARY
Terminal Finish	Tin/Lead (Sn/Pb)	Terminal Form	THROUGH-HOLE
Terminal Pitch	2.54 mm	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED	Width	7.62 mm

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..