Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

JN5174/001K +BOM

Wireless connectivity enabled by advanced microprocessor technology

Hersteller:

NXP Semiconductor
Herstellerteil #:

JN5174/001K
Datenblatt:

JN5174/001K Datenblatt (PDF)
Series:

JN517X
Programmable:

Not Verified
Type:

TxRx + MCU
RF Family/Standard:

802.15.4

JN5174/001K Allgemeine Beschreibung

The JN5174 device is an ultra-low-power, high-performance wireless microcontroller, optimized as a platform for ZigBee 3.0 applications in Smart Home and Smart Lighting networks. It features an Arm? Cortex?-M3 processor with debug and programmable clock speeds. The JN5174 device has 160 kB of embedded Flash memory as well as 32 kB of RAM and 4 kB of EEPROM. The embedded Flash can support "Over-The-Air" firmware updates. The device also includes a 2.4 GHz "IEEE802.15.4 compliant" transceiver and a comprehensive mix of on-chip analog and digital peripherals.The radio transmit power is configurable up to +10 dBm output. The very-low receive operating current (down to 12.7 mA in normal operation and 0.6 μA in sleep mode) results in long battery life, allowing operation directly from a coin cell. Through its power-saving modes, the device is therefore ideal for battery-powered nodes. The on-chip peripherals include a fail-safe I2C-bus, SPI-bus ports (both leader and follower) and a 6-channel analog-to-digital converter, directly supporting a wide range of applications without the need for extra hardware.For support documentation, please click here.

Spezifikationen

Category	RF and WirelessRF Transceiver ICs	Series	JN517X
Programmable	Not Verified	Type	TxRx + MCU
RF Family/Standard	802.15.4	Protocol	Zigbee®
Modulation	-	Frequency	2.4GHz ~ 2.485GHz
Data Rate (Max)	-	Power - Output	10dBm
Sensitivity	-96.5dBm	Memory Size	160kB Flash, 4kB EEPROM, 32kB RAM
Serial Interfaces	I²C, PWM, SPI, UART	GPIO	1
Voltage - Supply	2V ~ 3.6V	Current - Receiving	12.7mA ~ 14.8mA
Current - Transmitting	14mA ~ 22.5mA	Operating Temperature	-40°C ~ 125°C
Mounting Type	Surface Mount	Base Product Number	JN517

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..