Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

KSZ8851-16MLLJ +BOM

IC CTLR MAC 1PORT NON-PCI 48LQFP

Hersteller:

Microchip Technology, Inc
Herstellerteil #:

KSZ8851-16MLLJ
Datenblatt:

KSZ8851-16MLLJ Datenblatt (PDF)
Feature-maximum-operating-supply-voltage-v:

3.5
Feature-minimum-operating-supply-voltage-v:

3.1
Feature-packaging:

Tray
Feature-pin-count:

48
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an KSZ8851-16MLLJ

KSZ8851-16MLLJ Allgemeine Beschreibung

The KSZ8851-16MLLJ is a versatile MAC controller, Ethernet single-port device that operates at a data rate of 100Mbps. With its 48-pin LQFP case style, this controller is designed for Ethernet applications requiring reliable and fast connections. It conforms to IEEE 802.3 and IEEE 802.3u Ethernet standards, ensuring compatibility with a wide range of systems

Hauptmerkmale

Integrated MAC and PHY Ethernet Controller compliant with IEEE 802.3/802.3u standards
Designed for high performance and high throughput applications
Supports 10BASE-T/100BASE-TX
Supports IEEE 802.3x full-duplex flow control and half-duplex back pressure collision flow control
Supports DMA-slave burst data read and write transfers
Supports IP Header (IPv4)/TCP/UDP/ICMP checksum generation and checking
Supports IPv6 TCP/UDP/ICMP checksum generation and checking
Automatic 32-bit CRC generation and checking
Simple SRAM-like host interface easily connects to most common embedded MCUs.
Supports multiple data frames for transmit and receive without address bus and byte-enable signals
Supports both Big- and Little-Endian processors
Larger internal memory with 12K Bytes for RX FIFO and 6K Bytes for TX FIFO. Programmable low, high and overrun watermark for flow control in RX FIFO
Shared data bus for Data, Address and Byte Enable
Efficient architecture design with configurable host interrupt schemes to minimize host CPU overhead and utilization
Powerful and flexible address filtering scheme
Optional to use external serial EEPROM configuration for MAC address
Single 25MHz reference clock for both PHY and MAC
HBM ESD Rating 6kV
Power Modes, Power Supplies, and Packaging
Single 3.3V power supply with options for 1.8V, 2.5V and 3.3V VDD I/O
Built-in integrated 3.3V or 2.5V to 1.8V low noise regulator (LDO) for core and analog blocks
Enhanced power management feature with energy detect mode and soft power-down mode to ensure low-power dissipation during device idle periods Comprehensive LED indicator support for link, activity and 10/100 speed (2 LEDs) - User programmable
Low-power CMOS design
Commercial Temperature Range: 0°C to +70°C
Industrial Temperature Range: -40°C to +85°C
Flexible package options available in 32-pin (5mm x 5mm) QFN KSZ8851SNL/SNLI, 48-pin (7mm x 7mm) LQFP KSZ8851-16MLL or 128-pin PQFP KSZ8851-16/32MQL

Microchip Technology, Inc Originalbestand

Spezifikationen

feature-category	Single Chip	feature-process-technology
feature-maximum-operating-supply-voltage-v	3.5	feature-minimum-operating-supply-voltage-v	3.1
feature-maximum-supply-current-a		feature-packaging	Tray
feature-pin-count	48	feature-cecc-qualified	No
feature-esd-protection		feature-military	No
feature-aec-qualified	No	feature-aec-qualified-number
feature-auto-motive	No	feature-p-pap	No
feature-eccn-code	5A991b.1.	feature-svhc	No
feature-svhc-exceeds-threshold	No

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..