Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

KSZ8851SNL +BOM

Low Power Consumption

Hersteller:

Microchip
Herstellerteil #:

KSZ8851SNL
Datenblatt:

KSZ8851SNL Datenblatt (PDF)
Comments:

10/100 Ethernet Controller w/Generic 8/16/32-bit or SPI Interface
Ethernet Bandwidth:

10/100Mbps
TX/RX RAM Buffer(Bytes):

12KB(RX) 6KB(TX)
Interrupt Pin:

1
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an KSZ8851SNL

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

KSZ8851SNL Allgemeine Beschreibung

The KSZ8851SNL is an Ethernet controller manufactured by Microchip Technology (formerly Micrel). It's a highly integrated, single-port 10/100 Ethernet controller designed for embedded applications requiring Ethernet connectivity.

Hauptmerkmale

Integrated MAC and PHY Ethernet Controller compliant with IEEE 802.3/802.3u standards
Designed for high performance and high throughput applications
Supports 10BASE-T/100BASE-TX
Supports IEEE 802.3x full-duplex flow control and half-duplex back pressure collision flow control
Supports DMA-slave burst data read and write transfers
Supports IP Header (IPv4)/TCP/UDP/ICMP checksum generation and checking
Supports IPv6 TCP/UDP/ICMP checksum generation and checking
Automatic 32-bit CRC generation and checking
Simple SRAM-like host interface easily connects to most common embedded MCUs.
Supports multiple data frames for transmit and receive without address bus and byte-enable signals
Supports both Big- and Little-Endian processors
Larger internal memory with 12K Bytes for RX FIFO and 6K Bytes for TX FIFO. Programmable low, high and overrun watermark for flow control in RX FIFO
Shared data bus for Data, Address and Byte Enable
Efficient architecture design with configurable host interrupt schemes to minimize host CPU overhead and utilization
Powerful and flexible address filtering scheme
Optional to use external serial EEPROM configuration for MAC address
Single 25MHz reference clock for both PHY and MAC
HBM ESD Rating 6kV
Single 3.3V power supply with options for 1.8V, 2.5V and 3.3V VDD I/O
Built-in integrated 3.3V or 2.5V to 1.8V low noise regulator (LDO) for core and analog blocks
Enhanced power management feature with energy detect mode and soft power-down mode to ensure low-power dissipation during device idle periods Comprehensive LED indicator support for link, activity and 10/100 speed (2 LEDs) - User programmable
Low-power CMOS design
Commercial Temperature Range: 0°C to +70°C
Industrial Temperature Range: -40°C to +85°C
Flexible package options available in 32-pin (5mm x 5mm) QFN KSZ8851SNL/SNLI, 48-pin (7mm x 7mm) LQFP KSZ8851-16MLL or 128-pin PQFP KSZ8851-16/32MQL

Spezifikationen

Comments	10/100 Ethernet Controller w/Generic 8/16/32-bit or SPI Interface	Ethernet Bandwidth	10/100Mbps
TX/RX RAM Buffer(Bytes)	12KB(RX) 6KB(TX)	Interrupt Pin	1
LEDs	2	Op. Voltage (V)	0
# Ethernet Ports	1	Temp Range Min	-40
Temp Range Max	85	Checksum Offload	Yes
Fiber Support	No	Interface	8-/16-/32-bit or SPI
Supply voltage (V)	3.3	Internal LDO	Yes
Vdd I/O (V)	1.8/2.5/3.3	LinkMD Cable Diag	Yes
Int Term	No	ESD Rating (KV)	6
WOL	Yes	Largets Pkt-Size Bytes	1916
IPV6	Yes	# of VLAN	0
Flow Ctrl	Yes	feature-category	Single Chip
feature-process-technology		feature-maximum-operating-supply-voltage-v	3.5
feature-minimum-operating-supply-voltage-v	3.1	feature-maximum-supply-current-a
feature-packaging	Tray	feature-pin-count	32
feature-cecc-qualified	No	feature-esd-protection
feature-military	No	feature-aec-qualified	Yes
feature-aec-qualified-number		feature-auto-motive
feature-p-pap		feature-eccn-code	5A991
feature-svhc	No	feature-svhc-exceeds-threshold	No

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..