Bezahlverfahren
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
CCM PFC CONTROLLER
SSOP10Hersteller:
Herstellerteil #:
L4984D
Datenblatt:
Mode:
Continuous Conduction (CCM)
Current - Startup:
65 µA
Voltage - Supply:
10.3V ~ 22.5V
Operating Temperature:
-40°C ~ 150°C
EDA/CAD Modelle:
Bitte füllen Sie das kurze Formular unten aus und wir werden Ihnen umgehend ein Angebot zukommen lassen..
The L4984D is a current-mode PFC controller operating with line-modulated fixed-off-time (LM-FOT) control. A proprietary LM-FOT modulator allows fixed-frequency operation for boost PFC converters as long as they are operated in CCM (continuous conduction mode).The chip comes in a 10-pin SO package and offers a low-cost solution for CCM-operated boost PFC pre-regulators in EN61000-3-2 and JEIDA-MITI compliant applications, in a power range that spans from few hundred W to 1 KW and above.The highly linear multiplier includes a special circuit, able to reduce the crossover distortion of the AC input current, that allows wide-range-mains operation with a reasonably low THD, even over a large load range.The output voltage is controlled by means of a voltage-mode error amplifier and an accurate (1% at Tj = 25 °C) internal voltage reference. Loop stability is optimized by the voltage feedforward function (1/V2correction), which in this IC uses a proprietary technique that also significantly improves line transient response in the case of mains drops and surges (“bi-directional”).The device features low consumption and includes a disable function suitable for IC remote on/off. These features allow use in applications which also comply with the latest energy saving requirements (Blue Angel, ENERGY STAR, Energy 2000, etc.).In addition to overvoltage protection able to keep the output voltage under control during transient conditions, the IC is also provided with protection against feedback loop failures or erroneous settings. Other onboard protection functions allow that brownout conditions and boost inductor saturation can be safely handled. Soft-start limits peak current and extends off-time to prevent flux runaway in the initial cycles.The totem pole output stage, capable of 600 mA source and 800 mA sink current, is suitable for big MOSFETs or IGBT drive.350 W CCM PFC pre-regulator demonstration board .
Category | Integrated Circuits (ICs)Power Management (PMIC)PFC (Power Factor Correction) | Series | - |
Mode | Continuous Conduction (CCM) | Frequency - Switching | - |
Current - Startup | 65 µA | Voltage - Supply | 10.3V ~ 22.5V |
Operating Temperature | -40°C ~ 150°C | Mounting Type | Surface Mount |
Base Product Number | L4984 | feature-type | Power Factor Correction Controller |
feature-maximum-power-dissipation-mw | feature-packaging | Tube | |
feature-rad-hard | feature-pin-count | 10 | |
feature-cecc-qualified | No | feature-esd-protection | |
feature-escc-qualified | feature-military | No | |
feature-aec-qualified | No | feature-aec-qualified-number | |
feature-auto-motive | No | feature-p-pap | No |
feature-eccn-code | EAR99 | feature-svhc | Yes |
feature-svhc-exceeds-threshold | No |
After-Sales- und Abwicklungsbezogen
Bezahlverfahren
Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:
[email protected]Versandart
AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..
365-Tage-Produkt
Qualitätsgarantie
Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.
Menge. | Einzelpreis | Ext. Preis |
---|---|---|
1+ | - | - |
Die unten angegebenen Preise dienen nur als Referenz.
Alle Stücklisten (BOM) können per E-Mail gesendet werden an
[email protected],
oder füllen Sie das untenstehende Formular aus, um ein Angebot für L4984D zu erstellen, garantierte Angebote zurück innerhalb
12 Std.
Goods as described, good trader, fast delivery