Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

L9908 +BOM

Motor / Motion / Ignition Controllers & Drivers Automotive 3-phase motor gate driver unit

Hersteller:

STMicroelectronics, Inc
Herstellerteil #:

L9908
Datenblatt:

L9908 Datenblatt (PDF)
ECCN (US):

EAR99
ECCN (EU):

NEC
Packing Type:

Tray
Temperature (°C) Min:

-40
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an L9908

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

L9908 Allgemeine Beschreibung

Specific CAN-controlled brushless motor evaluati.Specific CAN-controlled brushless motor evaluati.

Hauptmerkmale

AEC-Q100 qualified
Full ISO26262 compliant, ASIL-D systems ready
VDH motor supply voltage range from 4.5 V to 75 V for working in single (12 V systems), double (24 V systems) and 48 V battery applications
3.3 V internal supply voltage generated from 5 V on VDD pin
Digital I/O compatible to 3.3 V/5 V logics
6 separate N-channel FET pre-drivers:
dedicated source connection to each FET
the device can withstand -14 V to 95 V on motor connection pins
0% to 100% duty cycle operation support
dedicated PWM input pin for each gate driver
dedicated source connection to each FET
the device can withstand -14 V to 95 V on motor connection pins
0% to 100% duty cycle operation support
dedicated PWM input pin for each gate driver
3 differential high accuracy current monitors for ground referred current measurements:
ADC/DAC architecture
SPI adjustable Gain Factor and Output Offset
built-in error calibration
the device can withstand -14 V to 6 V on input sensing pins
SPI readable current measurement
0 to 4.6 V DAC output dynamic range
ADC/DAC architecture
SPI adjustable Gain Factor and Output Offset
built-in error calibration
the device can withstand -14 V to 6 V on input sensing pins
SPI readable current measurement
0 to 4.6 V DAC output dynamic range
3 real time phase voltage monitor channels:
SPI programmable phase voltage feedback;
SPI readable phase duty cycle measurement;
SPI programmable phase voltage feedback;
SPI readable phase duty cycle measurement;
32-bit - 10 MHz SPI interface with 5-bit CRC and 1bit frame counter for internal setting, self-test and full diagnostics
Protection and diagnostic:
SPI programmable VDS diagnostic and protection in on-state
SPI programmable Dead Time protection
SPI programmable Shoot-through diagnostic and protection
Open load, short to GND and short to battery diagnostic in off-state
Over-temperature diagnostic and protection with SPI programmable warning flag
SPI readable Tj measurement
Ground loss diagnostic
System clock monitoring
Power supply pins VDD, VDH, VBP over-voltage and under-voltage diagnostic
FET driver supply VPRE and VCP under-voltage and over-voltage diagnostic
SPI Window Watchdog
Fault status flag output
SPI programmable VDS diagnostic and protection in on-state
SPI programmable Dead Time protection
SPI programmable Shoot-through diagnostic and protection
Open load, short to GND and short to battery diagnostic in off-state
Over-temperature diagnostic and protection with SPI programmable warning flag
SPI readable Tj measurement
Ground loss diagnostic
System clock monitoring
Power supply pins VDD, VDH, VBP over-voltage and under-voltage diagnostic
FET driver supply VPRE and VCP under-voltage and over-voltage diagnostic
SPI Window Watchdog
Fault status flag output

Spezifikationen

Marketing Status	Active	ECCN (US)	EAR99
ECCN (EU)	NEC	Packing Type	Tray
Temperature (°C) min	-40	Temperature (°C) max	150

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..