Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

LF398N +BOM

Sample and Hold 1-CH 20us 8-Pin PDIP

Hersteller:

NXP Semiconductor
Herstellerteil #:

LF398N
Datenblatt:

LF398N Datenblatt (PDF)
Amplifier Type:

Sample and Hold
Number Of Circuits:

1
Current - Input Bias:

10 nA
Voltage - Input Offset:

2 mV
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an LF398N

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LF398N Allgemeine Beschreibung

The LFx98x devices are monolithic sample-and-hold circuits that use BI-FET technology to obtain ultrahigh DC accuracy with fast acquisition of signal and low droop rate. Operating as a unity-gain follower, DC gain accuracy is 0.002% typical and acquisition time is as low as 6 µs to 0.01%. A bipolar input stage is used to achieve low offset voltage and wide bandwidth. Input offset adjust is accomplished with a single pin and does not degrade input offset drift. The wide bandwidth allows the LFx98x to be included inside the feedback loop of 1-MHz operational amplifiers without having stability problems. Input impedance of 10¹⁰ Ω allows high-source impedances to be used without degrading accuracy.

P-channel junction FETs are combined with bipolar devices in the output amplifier to give droop rates as low as 5 mV/min with a 1-µF hold capacitor. The JFETs have much lower noise than MOS devices used in previous designs and do not exhibit high temperature instabilities. The overall design ensures no feedthrough from input to output in the hold mode, even for input signals equal to the supply voltages.

Logic inputs on the LFx98x are fully differential with low input current, allowing for direct connection to TTL, PMOS, and CMOS. Differential threshold is1.4 V. The LFx98x will operate from ±5-V to ±18-V supplies.

An A version is available with tightened electrical specifications.

Hauptmerkmale

Operates from ±5-V to ±18-V Supplies
Less than 10-µs Acquisition Time
Logic Input Compatible With TTL, PMOS, CMOS
0.5-mV Typical Hold Step at Ch = 0.01 µF
Low Input Offset
0.002% Gain Accuracy
Low Output Noise in Hold Mode
Input Characteristics Do Not Change During Hold Mode
High Supply Rejection Ratio in Sample or Hold
Wide Bandwidth
Space Qualified, JM38510

Anwendung

• Ramp Generators With Variable Reset Level
• Integrators With Programmable Reset Level
• Synchronous Correlators
• 2-Channel Switches
• DC and AC Zeroing
• Staircase Generators

Spezifikationen

Category	Integrated Circuits (ICs)LinearAmplifiersInstrumentation, OP Amps, Buffer Amps	Series	-
Amplifier Type	Sample and Hold	Number of Circuits	1
Output Type	-	Slew Rate	-
Current - Input Bias	10 nA	Voltage - Input Offset	2 mV
Current - Supply	4.5mA	Voltage - Supply Span (Min)	10 V
Voltage - Supply Span (Max)	36 V	Operating Temperature	0°C ~ 70°C
Mounting Type	Through Hole	Base Product Number	LF398
Rating	Catalog	Operating temperature range (°C)	0 to 70

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..