Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

LM4132DMF-2.0/NOPB +BOM

0.05% 20-ppm/°C drift precision series voltage reference with shutdown enable

Hersteller:

Texas Instruments
Herstellerteil #:

LM4132DMF-2.0/NOPB
Datenblatt:

LM4132DMF-2.0/NOPB Datenblatt (PDF)
Mounting Style:

SMD/SMT
Reference Type:

Series Precision References
Output Voltage:

2.048 V
Initial Accuracy:

0.4 %
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an LM4132DMF-2.0/NOPB

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LM4132DMF-2.0/NOPB Allgemeine Beschreibung

The LM4132 family of precision voltage references performs comparable to the best laser-trimmed bipolar references, but in cost-effective CMOS technology. The key to this breakthrough is the use of EEPROM registers for correction of curvature, temperature coefficient (tempco), and accuracy on a CMOS band-gap architecture allowing package-level programming to overcome assembly shift. The shifts in voltage accuracy and tempco during assembly of die into plastic packages limit the accuracy of references trimmed with laser techniques.

Unlike other LDO references, the LM4132 can deliver up to 20 mA and does not require an output capacitor or buffer amplifier. These advantages along with the SOT-23 packaging are important for space-critical applications.

Series references provide lower power consumption than shunt references, because they do not have to idle the maximum possible load current under no-load conditions. This advantage, the low quiescent current (60 µA), and the low dropout voltage (400 mV) make the LM4132 ideal for battery-powered solutions.

The LM4132 is available in five grades (A, B, C, D and E) for greater flexibility. The best grade devices (A) have an initial accuracy of 0.05% with a specified temperature coefficient of 10 ppm/°C or less, while the lowest grade devices (E) have an initial accuracy of 0.5% and a tempco of 30 ppm/°C.

Hauptmerkmale

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
Output Initial Voltage Accuracy: 0.05%
Low Temperature Coefficient: 10 ppm/°C
Low Supply Current: 60 µA
Enable Pin Allowing a 3-µA Shutdown Mode
20-mA Output Current
Voltage Options: 1.8 V, 2.048 V, 2.5 V, 3 V, 3.3 V, 4.096 V
Custom Voltage Options Available (1.8 V to 4.096 V)
V_IN Range of V_REF + 400 mV to 5.5 V at 10 mA
Stable With Low-ESR Ceramic Capacitors

Spezifikationen

Product Category	Voltage References	Mounting Style	SMD/SMT
Reference Type	Series Precision References	Output Voltage	2.048 V
Initial Accuracy	0.4 %	Temperature Coefficient	30 PPM / C
Series VREF - Input Voltage - Max	6 V	Shunt Current - Max	20 mA
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 125 C
Series	LM4132	Accuracy	25 PPM/mA
Height	1.02 mm	Length	2.92 mm
Load Regulation	25 PPM/mA	Operating Supply Current	60 uA
Product	Voltage References	Product Type	Voltage References
Factory Pack Quantity	1000	Subcategory	PMIC - Power Management ICs
Topology	Series References	Width	1.6 mm
Unit Weight	0.000282 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..