Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

LMH0002SQ +BOM

'IC Cable Driver SDI' is a high-performance integrated circuit designed for driving cables used in SDI video applications

Hersteller:

ROCHESTER ELECTRONICS LLC
Herstellerteil #:

LMH0002SQ
Datenblatt:

LMH0002SQ Datenblatt (PDF)
Pbfree Code:

No
Part Life Cycle Code:

Active
Pin Count:

16
Differential Output:

YES
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an LMH0002SQ

LMH0002SQ Allgemeine Beschreibung

With a focus on wideband applications within electronic systems, the LMH0002SQ emerges as a high-speed dual operational amplifier that exceeds expectations in delivering top-notch performance. Its wide supply voltage range, typically ±2.5V to ±6V, provides unparalleled flexibility in circuit designs, ensuring seamless integration into a variety of electronic devices. Featuring a high slew rate of typically 1100V/μs, this operational amplifier facilitates rapid signal processing, making it an ideal candidate for applications where swift response times are essential, such as high-speed data acquisition and communications systems. The LMH0002SQ boasts a low input voltage noise density of typically 4.3nV/√Hz, guaranteeing minimal noise interference in sensitive signal processing tasks. In addition, its tightly controlled differential gain and phase are instrumental in preserving signal integrity, making it an indispensable component in precision instrumentation and communication applications. Furthermore, the operational amplifier offers excellent stability over temperature variations and a wide bandwidth, typically up to 750MHz, ensuring consistent and reliable performance across a diverse range of operating conditions. Whether it's for high-speed data acquisition or precision communication applications, the LMH0002SQ stands as the ultimate choice for electronic systems that demand unrivaled performance and unwavering reliability

Hauptmerkmale

VS = ±5V, TA = 25°C, RF = 1 kΩ, RG = 100Ω, RL = 100Ω,
AV = AVMAX = 9.4 V/V, Typical values unless specified.
−3 dB BW 150 MHz
Gain control BW 100 MHz
Adjustment range (<10 MHz) 80 dB
Gain matching (limit) ±0.50 dB
Supply voltage range 7V to 12V
Slew rate (inverting) 1500 V/μs
Supply current (no load) 11 mA
Linear output current ±60 mA
Output voltage swing ±2.4V
Input noise voltage 4.4 nV/√Hz
Input noise current 2.6 pA/√Hz
THD (20 MHz, RL = 100Ω, VO = 2 VPP) −45 dBc

Spezifikationen

Pbfree Code	No	Part Life Cycle Code	Active
Pin Count	16	Reach Compliance Code
Differential Output	YES	Driver Number of Bits	1
Input Characteristics	DIFFERENTIAL	Interface IC Type	LINE DRIVER
Interface Standard	GENERAL PURPOSE	JESD-30 Code	S-XQCC-N16
JESD-609 Code	e0	Length	4 mm
Moisture Sensitivity Level	1	Number of Functions	1
Number of Terminals	16	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	Peak Reflow Temperature (Cel)	260
Seated Height-Max	0.8 mm	Supply Voltage-Max	3.465 V
Supply Voltage-Min	3.135 V	Supply Voltage-Nom	3.3 V
Surface Mount	YES	Temperature Grade	INDUSTRIAL
Terminal Finish	TIN LEAD	Terminal Form	NO LEAD
Terminal Pitch	0.65 mm	Terminal Position	QUAD
Time@Peak Reflow Temperature-Max (s)	40	Width	4 mm
Product Category	Video ICs	Type	Video Cable Driver
Operating Supply Voltage	3.3 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Mounting Style	SMD/SMT
Data Rate	1.485 Gb/s	Operating Temperature Range	- 40 C to + 85 C
Product Type	Video ICs	Series	LMH0002
Factory Pack Quantity	1000	Subcategory	Video ICs
Tradename	LMH	Unit Weight	0.001411 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..