Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Privacy Policy.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

LMH6722MTX/NOPB

Quad Channel, Wideband Video Amplifier

Hersteller:

Texas Instruments, Inc
Herstellerteil #:

LMH6722MTX/NOPB
Datenblatt:

LMH6722MTX/NOPB Datenblatt (PDF)
genericPartNumber:

LMH6722
partDescription:

Quad Channel, Wideband Video Amplifier
Mounting Style:

SMD/SMT
Output Current per Channel:

70 mA
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an LMH6722MTX/NOPB

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LMH6722MTX/NOPB Allgemeine Beschreibung

The LMH6714/LMH6720/LMH6722 series combine Texas Instruments' VIP10 high speed complementary bipolar process with Texas Instruments' current feedback topology to produce a very high speed op amp. These amplifiers provide a 400MHz small signal bandwidth at a gain of +2V/V and a 1800V/μs slew rate while consuming only 5.6mA from ±5V supplies.

The LMH6714/LMH6720/LMH6722 series offer exceptional video performance with its 0.01% and 0.01° differential gain and phase errors for NTSC and PAL video signals while driving a back terminated 75Ω load. They also offer a flat gain response of 0.1dB to 120MHz. Additionally, they can deliver 70mA continuous output current. This level of performance makes them an ideal op amp for broadcast quality video systems.

The LMH6714/LMH6720/LMH6722's small packages (SOIC, SOT-23 and WSON), low power requirement, low noise and distortion allow the LMH6714/LMH6720/LMH6722 to serve portable RF applications. The high impedance state during shutdown makes the LMH6720 suitable for use in multiplexing multiple high speed signals onto a shared transmission line. The LMH6720 is also ideal for portable applications where current draw can be reduced with the shutdown function.

Hauptmerkmale

400MHz (A_V = +2V/V, V_OUT = 500mV_PP) −3dB BW
250MHz (A_V = +2V/V, V_OUT = 2V_PP) -3dB BW
0.1dB Gain Flatness to 120MHz
Low Power: 5.6mA
TTL Compatible Shutdown Pin (LMH6720)
Very Low Diff. Gain, Phase: 0.01%, 0.01° (LMH6714)
−58 HD2/ −70 HD3 at 20MHz
Fast Slew Rate: 1800V/μs
Low Shutdown Current: 500uA (LMH6720)
11ns Turn on Time (LMH6720)
7ns Shutdown Time (LMH6720)
Unity Gain Stable
Improved Replacement for CLC400,401,402,404,406 and 446 (LMH6714)
Improved Replacement for CLC405 (LMH6720)
Improved Replacement for CLC415 (LMH6722)
LMH6722QSD is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow

All trademarks are the property of their respective owners.

Spezifikationen

genericPartNumber	LMH6722	orderablePartNumber	LMH6722MTX/NOPB
partDescription	Quad Channel, Wideband Video Amplifier	statusDisplay	ACTIVE
statusDescription	This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.	Product Category	Operational Amplifiers - Op Amps
Mounting Style	SMD/SMT	Output Current per Channel	70 mA
Vos - Input Offset Voltage	8 mV	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Ib - Input Bias Current	20 uA
Operating Supply Current	22.5 mA	CMRR - Common Mode Rejection Ratio	54 dB
Series	LMH6722	Dual Supply Voltage	+/- 5 V
Height	0.9 mm	In - Input Noise Current Density	1.2 pA/sqrt Hz
Length	5 mm	Maximum Dual Supply Voltage	+/- 6.25 V
Minimum Dual Supply Voltage	+/- 4 V	Operating Supply Voltage	9 V, 12 V
Product	Operational Amplifiers	Product Type	Op Amps - Operational Amplifiers
PSRR - Power Supply Rejection Ratio	48 dB	Factory Pack Quantity	2500
Subcategory	Amplifier ICs	Supply Type	Single, Dual
Technology	BiCOM	Width	4.4 mm
Unit Weight	0.002018 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..