Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

LPV521MGE +BOM

This IC OP-AMP, known as LPV521MGE, has a maximum offset of 1230 uV and a bandwidth of 0.0061 MHz, and comes in a PDSO5 SC-70 5-pin package

Hersteller:

TI
Herstellerteil #:

LPV521MGE
Datenblatt:

LPV521MGE Datenblatt (PDF)
Part Life Cycle Code:

Transferred
Pin Count:

5
Reach Compliance Code:

compliant
ECCN Code:

EAR99
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an LPV521MGE

LPV521MGE Allgemeine Beschreibung

Description for the LPV521The LPV521 is a single nanopower 552-nW amplifier designed for ultra long life battery applications. The operating voltage range of 1.6 V to 5.5 V coupled with typically 351 nA of supply current make it well suited for RFID readers and remote sensor nanopower applications. The device has input common mode voltage 0.1 V over the rails, guaranteed TCVOS and voltage swing to the rail output performance. The LPV521 has a carefully designed CMOS input stage that outperforms competitors with typically 40 fA IBIAS currents. This low input current significantly reduces IBIAS and IOS errors introduced in megohm resistance, high impedance photodiode, and charge sense situations. The LPV521 is a member of the PowerWise family and has an exceptional power-to-performance ratio.The wide input common mode voltage range, guaranteed 1 mV VOS and 3.5 µV/°C TCVOS enables accurate and stable measurement for both high-side and low-side current sensing.EMI protection was designed into the device to reduce sensitivity to unwanted RF signals from cell phones or other RFID readers.The LPV521 is offered in the 5-pin SC70 package.

Hauptmerkmale

Features for the LPV521

For V_S = 5 V, Typical Unless Otherwise Noted
- Supply Current at V_CM = 0.3 V 400 nA (Max)
- Operating Voltage Range 1.6 V to 5.5 V
- Low TCV_OS 3.5 µV/°C (Max)
- V_OS 1 mV (Max)
- Input Bias Current 40 fA
- PSRR 109 dB
- CMRR 102 dB
- Open-Loop Gain 132 dB
- Gain Bandwidth Product 6.2 kHz
- Slew Rate 2.4 V/ms
- Input Voltage Noise at f = 100 Hz 255 nV/√Hz
- Temperature Range –40°C to 125°C

Spezifikationen

Source Content uid	LPV521MGE	Part Life Cycle Code	Transferred
Pin Count	5	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.33.00.01
Amplifier Type	OPERATIONAL AMPLIFIER	Architecture	VOLTAGE-FEEDBACK
Average Bias Current-Max (IIB)	0.00005 µA	Bias Current-Max (IIB) @25C	0.000001 µA
Common-mode Reject Ratio-Nom	92 dB	Frequency Compensation	YES
Input Offset Voltage-Max	1230 µV	JESD-30 Code	R-PDSO-G5
JESD-609 Code	e3	Length	2 mm
Low-Bias	YES	Low-Offset	NO
Micropower	YES	Moisture Sensitivity Level	1
Number of Functions	1	Number of Terminals	5
Operating Temperature-Max	125 °C	Operating Temperature-Min	-40 °C
Packing Method	TAPE AND REEL	Peak Reflow Temperature (Cel)	260
Power	NO	Programmable Power	NO
Qualification Status	Not Qualified	Seated Height-Max	1.1 mm
Slew Rate-Nom	2300 V/us	Supply Current-Max	0.00087 mA
Supply Voltage Limit-Max	6 V	Supply Voltage-Nom (Vsup)	1.8 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	AUTOMOTIVE	Terminal Finish	MATTE TIN
Terminal Form	GULL WING	Terminal Pitch	0.65 mm
Terminal Position	DUAL	Time@Peak Reflow Temperature-Max (s)	40
Unity Gain BW-Nom	6.1	Voltage Gain-Min	4470
Wideband	NO	Width	1.25 mm

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..