Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

MC68LC302 +BOM

LowPowerIntegratedMultiprotocolProcessorReferenceManual

Hersteller:

MOTOROLA
Herstellerteil #:

MC68LC302
Datenblatt:

MC68LC302 Datenblatt (PDF)
Paket/Koffer:

QFP
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an MC68LC302

MC68LC302 Allgemeine Beschreibung

INTRODUCTIONMotorola has developed a low-cost version of the well-known MC68302 integrated multiprotocol processor (IMP) called the MC68LC302. Simply put, the LC302 is a traditional 68302 minus the third serial communication controller (SCC3) and has a new static 68000 core, a new timer and low power modes. It is packaged in a low profile 100 TQFP that reduces board space from the regular 68302, as well as making it suitable for use in height restricted applications such as PCMCIA.FEATURESThe features of the LC302 are as follows. The items in bold face type show major differences from the MC68302, although a complete list of differences is given in 1.4 LC302 Differences. • On-Chip Static 68000 Core Supporting a 16- or 8-Bit M68000 Family-System • SIB Including: Independent Direct Memory Access (IDMA) Controller. Interrupt Controller with Two Modes of Operation Parallel Input/Output (I/O) Ports, some with Interrupt Capability Parallel Input/Output (I/O) Ports on D15-D8 in 8 bit mode On-Chip 1152-Byte Dual-Port RAM Three Timers Including a Watchdog Timer New Periodic Interrupt Timer (PIT) Four Programmable Chip-Select Lines with Wait-State Generator Logic Programmable Address Mapping of the Dual-Port RAM and IMP Registers On-Chip Clock Generator with Output Signal On-Chip PLL Allows Operation with 32kHz or 4MHz Crystals Glueless Interface to EPROM, SRAM, Flash EPROM, and EEPROM Allows Boot in 8-bit Mode, and Running Switch to 16-bit Mode System Control: System Status and Control Logic Disable CPU Logic (Slave Mode Operation) Hardware Watchdog New Low-Power (Standby) Modes With Wake-up From 2 Pins or PIT Freeze Control for Debugging (Available Only in the PGA Package) DRAM Refresh Controller • CP Including: Main Controller (RISC Processor) Two Independent Full-Duplex Serial Communications Controllers (SCCs) Supporting Various Protocols: High-Level/Synchronous Data Link Control (HDLC/SDLC) Universal Asynchronous Receiver Transmitter (UART) Binary Synchronous Communication (BISYNC) Transparent Modes Autobaud Support Instead of DDCMP and V.110 Boot from SCC Capability Four Serial DMA Channels for the Two SCCs Flexible Physical Interface Accessible by SCCs Including: Motorola Interchip Digital Link (IDL) General Circuit Interface (GCI, Also Known as IOM1-2) Pulse Code Modulation (PCM) Highway Interface Nonmultiplexed Serial Interface (NMSI) Implementing Standard Modem Signals SCP for Synchronous Communication Two Serial Management Controllers (SMCs) To Support IDL and GCI Auxiliary Channels • 100 Pin Thin Quad Flat Pack (TQFP) Packaging

Hauptmerkmale

The features of the LC302 are as follows. The items in bold face type show major differences from the MC68302, although a complete list of differences is given in 1.4 LC302 Differences.
On-Chip Static 68000 Core Supporting a 16- or 8-Bit M68000 Family-System
SIB Including:
Independent Direct Memory Access (IDMA) Controller.
Interrupt Controller with Two Modes of Operation
Parallel Input/Output (I/O) Ports, some with Interrupt Capability
Parallel Input/Output (I/O) Ports on D15-D8 in 8 bit mode
On-Chip 1152-Byte Dual-Port RAM
Three Timers Including a Watchdog Timer
New Periodic Interrupt Timer (PIT)
Four Programmable Chip-Select Lines with Wait-State Generator Logic
Programmable Address Mapping of the Dual-Port RAM and IMP Registers
On-Chip Clock Generator with Output Signal
On-Chip PLL Allows Operation with 32kHz or 4MHz Crystals
Glueless Interface to EPROM, SRAM, Flash EPROM, and EEPROM
Allows Boot in 8-bit Mode, and Running Switch to 16-bit Mode
System Control:
System Status and Control Logic
Disable CPU Logic (Slave Mode Operation)
Hardware Watchdog
New Low-Power (Standby) Modes With Wake-up From 2 Pins or PIT
Freeze Control for Debugging (Available Only in the PGA Package)
DRAM Refresh Controller
CP Including:
Main Controller (RISC Processor)
Two Independent Full-Duplex Serial Communications Controllers (SCCs)
Supporting Various Protocols:
High-Level/Synchronous Data Link Control (HDLC/SDLC)
Universal Asynchronous Receiver Transmitter (UART)
Binary Synchronous Communication (BISYNC)
Transparent Modes
Autobaud Support Instead of DDCMP and V.110
Boot from SCC Capability
Four Serial DMA Channels for the Two SCCs
Flexible Physical Interface Accessible by SCCs Including:
Motorola Interchip Digital Link (IDL)
General Circuit Interface (GCI, Also Known as IOM1-2)
Pulse Code Modulation (PCM) Highway Interface
Nonmultiplexed Serial Interface (NMSI) Implementing Standard
Modem Signals
SCP for Synchronous Communication
Two Serial Management Controllers (SMCs) To Support IDL and GCI Auxiliary Channels
100 Pin Thin Quad Flat Pack (TQFP) Packaging

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..