Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

MSC8256SVT1000B +BOM

Scalable and versatile DSC for high-speed data processing and contro

Hersteller:

NXP Semiconductor
Herstellerteil #:

MSC8256SVT1000B
Datenblatt:

MSC8256SVT1000B Datenblatt (PDF)
Product:

DSPs
Series:

MSC8256
Tradename:

StarCore
Mounting Style:

SMD/SMT
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an MSC8256SVT1000B

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MSC8256SVT1000B Allgemeine Beschreibung

The MSC8256 is based on the industry’s highest-performance DSP core built on StarCore® technology and designed for the advanced processing requirements and capabilities of today’s high-performance industrial applications for the medical imaging, aerospace, defense and advanced test and measurement markets. It delivers industry-leading performance and power savings, leveraging 45 nm process technology in a highly integrated system-on-chip (SoC) to provide performance equivalent to a 6 GHz, single-core device. The MSC8256 helps equipment manufacturers create end products and services that integrate more functionality in a smaller hardware footprint.

The MSC8256 DSP delivers a high level of performance and integration, combining six enhanced fully programmable SC3850 cores each running at up to 1GHz. The SC3850 DSP core has been independently assessed to enable 40 percent more processing capability per MHz than the nearest DSP competition. A high-performance internal RISC-based QUICC Engine® subsystem supports multiple networking protocols to guarantee reliable data transport over packet networks while significantly offloading processing from the DSP cores.

The MSC8256 embeds a substantial amount of internal memory to support a variety of advanced, high-speed interface types, including two RapidIO® interfaces, two gigabit Ethernet interfaces for network communications, a PCI Express® controller, two DDR controllers for high-speed, industry standard memory interface and four multichannel TDM interfaces. The MSC8256 allows a high degree of scalability through pin compatibility with all MSC825x and MSC815x DSP devices.

Hauptmerkmale

Six StarCore® DSP SC3850 core subsystems each with:
SC3850 DSP core at up to 1 GHz
512 KB unified L2 cache/M2 memory
32 KB I-cache, 32 KB D-cache
Fully programmable 1056 KB M3 shared memory (SRAM)
Two DDR 2/3 64-bit SDRAM interfaces at up to 800 MHz data rate
Chip-level arbitration and switching fabric, non-blocking, fully pipelined, low-latency
High-speed interconnects
Dual 4x/1x Serial RapidIO at 1.25/2.5/3.125 Gbaud
PCI Express 4x/1x
Two SGMII
Dual RISC QUICC Engine® supporting
RGMII gigabit Ethernet ports
Serial peripheral interface (SPI)
TDM highway 1024 ch., 400 Mbps, divided into four ports of 256
DMA engine 16 bi-directional channels
Other peripheral interfaces
UART
I²C
32 GPIO
16 timers
Technology
Process: 45 nm SOI
Voltage: 1-volt core, 2.5, 1.8/1.5-volt I/O
Package: FC-BPGA (29 x 29) 1-mm pitch, RoHS
This product is included in NXP®.s product longevity program, with assured supply for a minimum of 10 years after launch

Spezifikationen

Product Category:	Digital Signal Processors & Controllers - DSP, DSC	Product:	DSPs
Series:	MSC8256	Tradename:	StarCore
Mounting Style:	SMD/SMT	Core:	SC3850
Number of Cores:	6 Core	Maximum Clock Frequency:	1 GHz
L1 Cache Instruction Memory:	6 x 32 kB	L1 Cache Data Memory:	6 x 32 kB
Operating Supply Voltage:	1 V	Minimum Operating Temperature:	0 C
Maximum Operating Temperature:	+ 105 C	Packaging:	Tray
Data Bus Width:	32 bit, 64 bit	I/O Voltage:	1 V, 2.5 V
Interface Type:	I2C, SPI, UART	MMACS:	8000 MMACS
Moisture Sensitive:	Yes	Number of Timers/Counters:	18 Timer
Processor Series:	StarCore	Product Type:	DSP - Digital Signal Processors & Controllers
Factory Pack Quantity:	1	Subcategory:	Embedded Processors & Controllers
Supply Voltage - Max:	1.05 V	Supply Voltage - Min:	970 mV
Watchdog Timers:	Watchdog Timer	Unit Weight:	0.393340 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..