Bezahlverfahren
NCP1117ST50T3G +BOM
LDO Regulator, 1 A, Fixed and Adjustable, Positive
SOT-223-3-
Hersteller:
-
Herstellerteil #:
NCP1117ST50T3G
-
Datenblatt:
-
Output Configuration:
Positive
-
Output Type:
Fixed
-
Number Of Regulators:
1
-
Voltage - Input (Max):
20V
-
EDA/CAD Modelle:
Verfügbarkeit: 7822 Stck
Bitte füllen Sie das kurze Formular unten aus und wir werden Ihnen umgehend ein Angebot zukommen lassen..
NCP1117ST50T3G Allgemeine Beschreibung
The NCP1117 series comprises low dropout (LDO) positive linear voltage regulators capable of delivering an output current exceeding 1.0 A. They exhibit a maximum dropout voltage of 1.2 V when supplying 800 mA, even across a range of temperatures. This series includes eight fixed output voltage options: 1.5 V, 1.8 V, 2.0 V, 2.5 V, 2.85 V, 3.3 V, 5.0 V, and 12 V, all of which maintain regulation without needing a minimum load.
Additionally, there's an adjustable output version that can be set between 1.25 V and 18.8 V using two external resistors. The on-chip trimming ensures the reference/output voltage accuracy within +/- 1.0%. These regulators incorporate internal protection mechanisms, such as output current limiting, safe operating area compensation, and thermal shutdown.
The NCP1117 series can handle input voltages of up to 20 V. These devices are available in SOT223 and DPAK packages.
How NCP1117ST50T3G Work?
The NCP1117ST50T3G operates as a low-drop positive voltage regulator, commonly employed in switching power supply circuits to deliver a consistent and stable 5V output. A typical application of the NCP1117ST50T3G is in a full-wave diode rectifier power supply circuit. In this setup, there are three key stages:
-
Power Transformer: This is the first stage of the circuit, and its role is to step down the high-voltage AC input (usually 220V or 120V AC) to a lower AC voltage, typically 5V AC.
-
Diode Rectifier: The second stage of the circuit is the diode rectifier. It takes the 5V AC output from the transformer and converts it into a 5V DC output. This conversion involves converting the alternating current (AC) into direct current (DC).
-
LD1117 Regulator: The third and final stage is where the NCP1117ST50T3G voltage regulator, often referred to as LD1117, comes into play. Its primary function is to smooth out any remaining ripple or fluctuations in the converted DC voltage from the diode rectifier. The LD1117 ensures that the output voltage is stable and remains at a constant 5V DC.
How NCP1117ST50T3G Work
NCP1117 Pinout
NCP1117 Pinout
Hauptmerkmale
Specifications
- Number of Terminals: 3
- Maximum Input DC Voltage: Up to 20V
- Maximum Power Dissipation: 15 Watts
- Maximum Operating Junction Temperature: 125°C
- Output Voltage: 5V
- Maximum Output Current: Greater than 1.0A
- Ripple Rejection: 64 Decibels (dB)
- Package Type: Lead-free SOT-223
Features
- Output Current in Excess of 1.0 A
- 1.2 V Maximum Dropout Voltage at 800 mA Over Temperature
- Fixed Output Voltages of 1.5 V, 1.8 V, 2.0 V, 2.5 V, 2.85 V, 3.3 V, 5.0 V, and 12 V
- Adjustable Output Voltage Option
- No Minimum Load Requirement for Fixed Voltage Output Devices
- Reference/Output Voltage Trimmed to +/- 1.0%
- Current Limit, Safe Operating and Thermal Shutdown Protection
- Operation to 20 V Input
- Pb-Free Packages are Available
NCP1117ST50T3G Alternatives
- LM1117
- LM7805
- AMS1117
- MCP1700
- LD1117V33
NCP1117ST50T3G Datasheet PDF
Check and Download NCP1117ST50T3G Datasheet PDF here>>
Anwendung
- Consumer and Industrial Equipment Point of Regulation
- Active SCSI Termination for 2.85 V Version
- Switching Power Supply Post Regulation
- Hard Drive Controllers
- Battery Chargers
- Automotive
Spezifikationen
Category | Integrated Circuits (ICs)Power Management (PMIC)Voltage Regulators - Linear | Series | - |
Output Configuration | Positive | Output Type | Fixed |
Number of Regulators | 1 | Voltage - Input (Max) | 20V |
Voltage - Output (Min/Fixed) | 5V | Voltage - Output (Max) | - |
Voltage Dropout (Max) | 1.2V @ 800mA | Current - Output | 1A |
Current - Quiescent (Iq) | 10 mA | PSRR | 61dB (120Hz) |
Control Features | - | Protection Features | Over Current, Over Temperature |
Operating Temperature | 0°C ~ 125°C | Mounting Type | Surface Mount |
Base Product Number | NCP1117 |
Servicerichtlinien und andere
After-Sales- und Abwicklungsbezogen
Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:
[email protected]Versandart
AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..
365-Tage-Produkt
Qualitätsgarantie
Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.
NCP1117ST50T3G Datenblatt PDF
NCP1117ST50T3G PDF Vorschau
In Stock: 7.822
Minimum Order: 1
Menge. | Einzelpreis | Ext. Preis |
---|---|---|
1+ | - | - |
Die unten angegebenen Preise dienen nur als Referenz.
Alle Stücklisten (BOM) können per E-Mail gesendet werden an [email protected], oder füllen Sie das untenstehende Formular aus, um ein Angebot für NCP1117ST50T3G zu erstellen, garantierte Angebote zurück innerhalb 12 Std.
Item as described. Packaging could be better and flux was not cleaned from the board, but everything works.