Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Privacy Policy.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

OPA2695ID

Ultra-Wideband, Current-Feedback Operational Amplifier with Disable

Hersteller:

Texas Instruments, Inc
Herstellerteil #:

OPA2695ID
Datenblatt:

OPA2695ID Datenblatt (PDF)
Amplifier Type:

Current Feedback
Number of Circuits:

2
Output Type:

Differential
Slew Rate:

2900V/µs
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an OPA2695ID

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

OPA2695ID Allgemeine Beschreibung

The OPA2695 is a dual, very high bandwidth, current-feedback op amp that combines exceptional 2900V/µs slew rate and low input voltage noise to deliver a precision, low-cost, high dynamic range intermediate frequency (IF) amplifier. The device has been optimized for high gain operation, and the pin outs of the two available packages (QFN-16, SO-8) have been optimized to provide symmetrical input and output paths. This architecture makes the OPA2695 an ideal choice as a differential driver, such as for a high-speed analog-to-digital converter (ADC).

The OPA2695 low 12.9mA/channel supply current is precisely trimmed at +25°C. This trim, along with a low temperature drift, gives low system power over temperature. System power may be further reduced with the optional disable control pin. Leaving this pin open, or holding it high, gives normal operation. If pulled low, the OPA2695 supply current drops to less than 200µA/channel. This power-saving feature, along with exceptional single +5V operation, makes the OPA2695 ideal for portable applications. The OPA2695 is available in an SO-8 (without disable) package or QFN-16 package (with disable).

Hauptmerkmale

GAIN = +2V/V BANDWIDTH (850MHz)
GAIN = +8V/V BANDWIDTH (450MHz)
OUTPUT VOLTAGE SWING: ±4.1V
ULTRA-HIGH SLEW RATE: 2900V/µs
DIFFERENTIAL 3RD-ORDER INTERCEPT:
> 40dBm (f < 140MHz, 800 )
LOW POWER: 129mW/channel
LOW DISABLED POWER: 0.5mW/channel
APPLICATIONS
- VERY WIDEBAND ADC DRIVERS
- LOW-COST PRECISION IF AMPLIFIERS
- BROADBAND VIDEO LINE DRIVERS
- PORTABLE INSTRUMENTS
- ACTIVE FILTERS
- ARB WAVEFORM OUTPUT DRIVERS

PowerPAD is a trademark of Texas Instruments, Inc.
All other trademarks are the property of their respective owners.

Spezifikationen

Category	Integrated Circuits (ICs)LinearAmplifiersInstrumentation, OP Amps, Buffer Amps	Series	-
Amplifier Type	Current Feedback	Number of Circuits	2
Output Type	Differential	Slew Rate	2900V/µs
Gain Bandwidth Product	1.1 kHz	-3db Bandwidth	1.1 GHz
Current - Input Bias	20 µA	Voltage - Input Offset	300 µV
Current - Supply	25.8mA (x2 Channels)	Current - Output / Channel	120 mA
Voltage - Supply Span (Min)	3.5 V	Voltage - Supply Span (Max)	12 V
Operating Temperature	-40°C ~ 85°C	Mounting Type	Surface Mount
Base Product Number	OPA2695

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..