Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

OX16PCI952 +BOM

IntegratedHighPerformanceDualUARTs,ParallelPortand5.0vPCIinterface

Hersteller:

OXFORD
Herstellerteil #:

OX16PCI952
Datenblatt:

OX16PCI952 Datenblatt (PDF)
Paket/Koffer:

QFP
RoHS:
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an OX16PCI952

OX16PCI952 Allgemeine Beschreibung

[Oxford Semiconductor]DESCRIPTIONThe OX16PCI952 is a single chip solution for PCI-based serial and parallel expansion add-in cards. It is a dual function device, offering IO or memory mapped access to the two ultra-high performance OX16C950 UARTs and the bi-directional parallel port. These functions are defined by Function 0 and Function 1, respectively. Serial port cards with 2 serial ports and a parallel port can be designed without redefining any device parameters.FEATURES• Two 16C950 High performance UART channels• IEEE1284 Compliant SPP/EPP/ECP parallel port• Multi-function target PCI controller. Fully compliant to PCI bus specification 2.2 and PCI Power Management 1.0.• Function access to pre-configure each UART and the parallel port, prior to handover to generic device drivers.• UARTs fully software compatible with 16C550-type devices.• Baud rates up to 15Mbps in asynchronous mode and 60Mbps in external 1x clock mode• 128-byte deep FIFO per transmitter and receiver• Flexible clock prescaler from 1 to 31.875• Automated in-band flow control using programmable Xon/Xoff in both directions• Automated out-of-band flow control using CTS#/RTS# and/or DSR#/DTR#• Arbitrary trigger levels for receiver and transmitter FIFO interrupts and automatic in-band and out-ofband flow control• Infra-red (IrDA) receiver and transmitter operation• 5, 6, 7, 8 and 9-bits data framing• Global Interrupt Status and readable FIFO levels to facilitate implementation of efficient device drivers• Detection of bad data in the receiver FIFO• 2 multi-purpose IO pins which can be configured as interrupt inputs or ‘wake-up’ pins (via local registers).• Auto-detection of a range of optional MicrowireTM compatible EEPROMs, to reconfigure device.• Operation via IO or memory mapping.• 5.0V operation• 128 pin TQFP package

Hauptmerkmale

Two 16C950 High performance UART channels
IEEE1284 Compliant SPP/EPP/ECP parallel port
Multi-function target PCI controller. Fully compliant to PCI bus specification 2.2 and PCI Power Management 1.0.
Function access to pre-configure each UART and the parallel port, prior to handover to generic device drivers.
UARTs fully software compatible with 16C550-type devices.
Baud rates up to 15Mbps in asynchronous mode and 60Mbps in external 1x clock mode
128-byte deep FIFO per transmitter and receiver
Flexible clock prescaler from 1 to 31.875
Automated in-band flow control using programmable Xon/Xoff in both directions
Automated out-of-band flow control using CTS#/RTS# and/or DSR#/DTR#
Arbitrary trigger levels for receiver and transmitter FIFO interrupts and automatic in-band and out-ofband flow control
Infra-red (IrDA) receiver and transmitter operation
5, 6, 7, 8 and 9-bits data framing
Global Interrupt Status and readable FIFO levels to facilitate implementation of efficient device drivers
Detection of bad data in the receiver FIFO
2 multi-purpose IO pins which can be configured as interrupt inputs or ‘wake-up’ pins (via local registers).
Auto-detection of a range of optional MicrowireTM compatible EEPROMs, to reconfigure device.
Operation via IO or memory mapping.
5.0V operation
128 pin TQFP package

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..