Bezahlverfahren
PIC18F2685 +BOM
28/40/44-PinEnhancedFlashMicrocontrollerswithECANTechnology,10-BitA/DandnanoWattTechnology
QFN28-
Hersteller:
-
Herstellerteil #:
PIC18F2685
-
Datenblatt:
-
Series:
PIC18F
-
Core Processor:
PIC
-
Core Size:
8-Bit
-
Speed:
40MHz
-
EDA/CAD Modelle:
Verfügbarkeit: 7072 Stck
Bitte füllen Sie das kurze Formular unten aus und wir werden Ihnen umgehend ein Angebot zukommen lassen..
PIC18F2685 Allgemeine Beschreibung
DEVICE OVERVIEWThis document contains device-specific information for the following devices: • PIC18F2682 • PIC18F2685 • PIC18F4682 • PIC18F4685This family of devices offers the advantages of all PIC18 microcontrollers – namely, high computational performance at an economical price – with the addition of high-endurance, Enhanced Flash program memory. In addition to these features, the PIC18F2682/2685/4682/4685 family introduces design enhancements that make these microcontrollers a logical choice for many high-performance, power sensitive applications.Power-Managed Modes:• Run: CPU on, peripherals on• Idle: CPU off, peripherals on• Sleep: CPU off, peripherals off• Idle mode currents down to 5.8 μA typical• Sleep mode currents down to 0.1 μA typical• Timer1 Oscillator: 1.1 μA, 32 kHz, 2V• Watchdog Timer: 2.1 μA• Two-Speed Oscillator Start-upFlexible Oscillator Structure:• Four Crystal modes, up to 40 MHz• 4x Phase Lock Loop (PLL) – available for crystal and internal oscillators• Two External RC modes, up to 4 MHz• Two External Clock modes, up to 40 MHz• Internal Oscillator Block: - 8 user-selectable frequencies, from 31 kHz to 8 MHz - Provides a complete range of clock speeds, from 31 kHz to 32 MHz when used with PLL - User-tunable to compensate for frequency drift• Secondary Oscillator using Timer1 @ 32 kHz• Fail-Safe Clock Monitor - Allows for safe shutdown if peripheral clock stopsSpecial Microcontroller Features:• C compiler Optimized Architecture with optional Extended Instruction Set• 100,000 Erase/Write Cycle Enhanced Flash Program Memory typical• 1,000,000 Erase/Write Cycle Data EEPROM Memory typical• Flash/Data EEPROM Retention:> 40 years• Self-Programmable under Software Control• Priority Levels for Interrupts• 8 x 8 Single-Cycle Hardware Multiplier• Extended Watchdog Timer (WDT): - Programmable period from 41 ms to 131s• Single-Supply 5V In-Circuit Serial Programming™ (ICSP™) via two pins• In-Circuit Debug (ICD) via two pins• Wide operating voltage range: 2.0V to 5.5VPeripheral Highlights:• High-Current Sink/source 25 mA/25 mA• Three External Interrupts• One Capture/Compare/PWM (CCP1) module• Enhanced Capture/Compare/PWM (ECCP1) module (40/44-pin devices only): - One, two or four PWM outputs - Selectable polarity - Programmable dead time - Auto-shutdown and auto-restart• Master Synchronous Serial Port (MSSP) module supporting 3-Wire SPI (all 4 modes) and I2C™ Master and Slave modes• Enhanced Addressable USART module: - Supports RS-485, RS-232 and LIN 1.3 - RS-232 operation using internal oscillator block (no external crystal required) - Auto-wake-up on Start bit - Auto-Baud Detect• 10-Bit, up to 11-Channel Analog-to-Digital Converter module (A/D), up to 100 ksps: - Auto-acquisition capability - Conversion available during Sleep• Dual Analog Comparators with Input MultiplexingECAN Module Features:• Message bit rates up to 1 Mbps• Conforms to CAN 2.0B ACTIVE Specification• Fully Backward Compatible with PIC18XXX8 CAN modules• Three Modes of Operation: - Legacy, Enhanced Legacy, FIFO• Three Dedicated Transmit Buffers with Prioritization• Two Dedicated Receive Buffers• Six Programmable Receive/Transmit Buffers• Three Full, 29-Bit Acceptance Masks• 16 Full, 29-Bit Acceptance Filters w/Dynamic Association• DeviceNet™ Data Byte Filter Support• Automatic Remote Frame Handling• Advanced Error Management Features
Hauptmerkmale
- ECAN™ nanoWatt Features Internal Oscillator Self-Programming 40 MHz Max Speed LIN USART
Anwendung
- Embedded systems
- Industrial automation
- Robotics
- Consumer electronics
- Automotive systems
- Home appliances
- Medical devices
- IoT devices
Spezifikationen
Product Name | PIC18F2685 | Product Type | Microcontroller |
Series | PIC18F | Core Processor | PIC |
Core Size | 8-Bit | Speed | 40MHz |
Connectivity | I²C, SPI, UART/USART | Peripherals | ADC, CCP, POR, PWM, WDT |
Number of I/Os | 29 | Program Memory Size | 96KB (96K x 8) |
Data RAM Size | 3.8KB | Voltage - Supply | 2.0 V ~ 5.5 V |
Operating Temperature | -40°C ~ 125°C | Mounting Type | Through Hole |
PIC18F2685 Gleichwertige Teile
Sie können diese Ersatz- und Alternativteile in Betracht ziehen:
Artikelnummer
Auf Lager
Paket
Beschreibung
Artikelnummer: PIC18F2680
Auf Lager: 9.293
Paket:
Beschreibung: PIC18F2680: Another member of the PIC18F family with similar features and specifications.
Artikelnummer: PIC18F2682
Auf Lager: 5.779
Paket:
Beschreibung: PIC18F2682: Another member of the PIC18F family with similar features and specifications.
Servicerichtlinien und andere
After-Sales- und Abwicklungsbezogen
Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:
[email protected]Versandart
AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..
365-Tage-Produkt
Qualitätsgarantie
Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.
In Stock: 7.072
Minimum Order: 1
Menge. | Einzelpreis | Ext. Preis |
---|---|---|
1+ | - | - |
Die unten angegebenen Preise dienen nur als Referenz.
Alle Stücklisten (BOM) können per E-Mail gesendet werden an [email protected], oder füllen Sie das untenstehende Formular aus, um ein Angebot für PIC18F2685 zu erstellen, garantierte Angebote zurück innerhalb 12 Std.
Avaq never disappoints with their prompt shipping and fantastic customer support. They truly go above and beyond to ensure a smooth buying experience.