Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Privacy Policy.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

PIC24FJ128GB202-I/SS +BOM

The PIC24FJ128GB202-I/SS is a powerful 16-bit MCU that boasts large memory capacity

Hersteller:

Microchip Technology, Inc
Herstellerteil #:

PIC24FJ128GB202-I/SS
Datenblatt:

PIC24FJ128GB202-I/SS Datenblatt (PDF)
Series:

PIC® XLP™ 24F
Core Processor:

PIC
Core Size:

16-Bit
Speed:

32MHz
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an PIC24FJ128GB202-I/SS

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

PIC24FJ128GB202-I/SS Allgemeine Beschreibung

The integrated crypto module further enhances the security of the device, making it ideal for applications where data protection is crucial. Whether it's in IoT devices, medical equipment, or industrial machinery, this microcontroller provides a secure platform for sensitive information

Hauptmerkmale

AES Engine with 128,192 or 256-Bit Key
Supports ECB, CBC, OFB, CTR and CFB128 modes
DES/Triple DES (TDES) Engine: Supports 2-Key and 3-Key EDE or DED TDES
Supports up to Three Unique Keys for TDES
Programmatically Secure
True Random Number Generator
Pseudorandom Number Generator
Non-Readable, On-Chip, OTP Key Storages

Extreme Low-Power Current Consumption: WDT: 270 nA @ 3.3V typical, RTCC: 400 nA @ 32 kHz, 3.3V typical, Deep Sleep current, 40 nA, 3.3V typical
Multiple Power Management Options: VBAT, Deep Sleep, Sleep and Idle Mode, Doze Mode.
Alternate Clock modes allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction

USB v2.0: On-The-Go (OTG) Compliant, Dual Role Capable; can Act as Either Host or Peripheral
Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB Operation in Host mode
High-Precision PLL for USB
Full-Speed USB Device mode Operation from FRC Oscillator: No crystal oscillator required

Supply Voltage Range of 2.0V to 3.6V
Up to 16 MIPS Operation @ 32 MHz
17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
32-Bit by 16-Bit Hardware Divider
16 x 16-Bit Working Register Array
C Compiler Optimized Instruction Set Architecture (ISA)
Two Address Generation Units (AGUs) for Separate Read and Write Addressing of Data Memory

10/12-Bit, 12-Ch ADC: Conversion rate of 500 ksps (10-bit), 200 ksps (12-bit)
ADC Conversion available during Sleep and Idle
Three Rail-to-Rail, Enhanced Analog Comparators with Programmable Input/Output Configuration
Three On-Chip Programmable Voltage References
Charge Time Measurement Unit (CTMU): Used for capacitive touch sensing or precise time measurement

Peripheral Pin Select (PPS); Allows Independent I/O Mapping of many Peripherals
Five 16-Bit Timers/Counters with Pre-scaler
Six-Channel DMA supports All Peripheral modules
Six Input Capture modules, each with a Dedicated 16-Bit Timer
Six Output Compare/PWM modules, each with a Dedicated 16-Bit Timer
Hardware Real-Time Clock/Calendar (RTCC)
Three SPI modules including I2S mode
Two I2C™ modules Support Multi-Master/Slave mode and 7-Bit/10-Bit Addressing
Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator
Four UART modules, supporting RS-485, RS-232, LIN/J2602, and On-chip hardware encoder/decoder for IrDA®

Microchip Technology, Inc Originalbestand

Anwendung

Automotive, Consumer Electronics, Motor Drive & Control, Lighting, Medical, Security, Multimedia, Communications & Networking, Audio

Spezifikationen

Category	Integrated Circuits (ICs)EmbeddedMicrocontrollers	Series	PIC® XLP™ 24F
Core Processor	PIC	Core Size	16-Bit
Speed	32MHz	Connectivity	I²C, IrDA, LINbus, SmartCard, SPI, UART/USART
Peripherals	AES, Brown-out Detect/Reset, DMA, I²S, HLVD, POR, PWM, WDT	Number of I/O	20
Program Memory Size	128KB (43K x 24)	Program Memory Type	FLASH
EEPROM Size	-	RAM Size	8K x 8
Voltage - Supply (Vcc/Vdd)	2V ~ 3.6V	Data Converters	A/D 9x10b/12b
Oscillator Type	Internal	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	PIC24FJ128GB202

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..