Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

S-8241ABPMC-GBPT2G +BOM

S-8241ABPMC-GBPT2G: Li-Ion/Li-Pol Battery Protection in SOT-23 Package

Hersteller:

ABLIC INC
Herstellerteil #:

S-8241ABPMC-GBPT2G
Datenblatt:

S-8241ABPMC-GBPT2G Datenblatt (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Not Recommended
Pin Count:

5
Reach Compliance Code:

compliant
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an S-8241ABPMC-GBPT2G

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

S-8241ABPMC-GBPT2G Allgemeine Beschreibung

The S-8241ABPMC-GBPT2G from Epson Electronics is a high-quality lithium-ion battery protection IC that ensures the safety and longevity of single-cell lithium-ion batteries. With features such as overcharge protection, over-discharge protection, overcurrent protection, and short circuit protection, this IC provides comprehensive protection during both charging and discharging cycles

Hauptmerkmale

(1) Internal high-accuracy voltage detection circuit
Overcharge detection voltage: 3.9 to 4.4 V (5 mV-step)
Accuracy of ±25 mV(+25 °C) and ± 30 mV(−5 to +55 °C)
Overcharge release voltage: 3.8 to 4.4 V1 Accuracy of ±50 mV
Overdischarge detection voltage: 2.0 to 3.0 V (100 mV-step) Accuracy of ±80 mV
Overdischarge release voltage: 2.0 to 3.4 V2 Accuracy of ±100 mV
Overcurrent 1 detection voltage: 0.05 to 0.3 V (5 mV-step) Accuracy of ±20 mV
Overcurrent 2 detection voltage: 0.5 V (fixed) Accuracy of ±100 mV
(2) A high voltage withstand device isused for charger connection pins
(VM and CO pins: Absolute maximum rating = 26 V)
(3) Delay times (overcharge: tCU; overdischarge: tDL; overcurrent 1: tlOV1 ; overcurrent 2: tlOV2) are generated by an internal circuit. (External capacitors are unnecessary.) Accuracy of ±30%
(4) Internal three-step overcurrent detection circuit (overcurrent 1, overcurrent 2, and load short-circuiting)
(5) Either the 0 V battery charging function or 0 V battery charge inhibiting function can be selected.
(6) Products with and without a power-down function can be selected.
(7) Charger detection function and abnormal charge current detection function
The overdischarge hysterisis is released by detecting a negative VM pin voltage (typ. −1.3 V) (Charger detection function).
If the output voltage at DO pin is high and the VM pin voltage becomes equalto or lower than the charger detection voltage (typ. −1.3 V), the output voltage at CO pin goes low (Abnormal charge current detection function).
(8) Low current consumption
Operation: 3.0 μA typ. 5.0 μA max.
Power-down mode: 0.1 μA max.
(9) Wide operating temperature range: −40 to +85 °C
(10) Small package SOT-23-5, SNT-6A
(11) Lead-free products
1.Overcharge release voltage = Overcharge detection voltage - Overcharge hysteresis
The overcharge hysteresis can be selected in the range 0.0, or 0.1 to 0.4 V in 50 mV steps. (However, selection
“Overcharge release voltage<3.8 V” is enabled.)
2.Overdischarge release voltage = Overdischarge detection voltage + Overdischarge hysteresis
The overdischarge hysteresis can be selected in the range 0.0 to 0.7 V in100 mV steps. (However, selection
“Overdischarge release voltage>3.4 V” is enabled.)

Spezifikationen

Pbfree Code	Yes	Part Life Cycle Code	Not Recommended
Pin Count	5	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.39.00.01
Adjustable Threshold	NO	Analog IC - Other Type	POWER SUPPLY SUPPORT CIRCUIT
JESD-30 Code	R-PDSO-G5	Length	2.9 mm
Number of Channels	1	Number of Functions	1
Number of Terminals	5	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	Peak Reflow Temperature (Cel)	260
Qualification Status	Not Qualified	Seated Height-Max	1.3 mm
Supply Voltage-Max (Vsup)	8 V	Supply Voltage-Min (Vsup)	1.5 V
Supply Voltage-Nom (Vsup)	3.5 V	Surface Mount	YES
Temperature Grade	INDUSTRIAL	Terminal Form	GULL WING
Terminal Pitch	0.95 mm	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	10	Width	1.6 mm

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..