Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

S3C2410X01 +BOM

Hersteller:

SAMSUNG
Herstellerteil #:

S3C2410X01
Datenblatt:

S3C2410X01 Datenblatt (PDF)
Paket/Koffer:

BGA
Produktart:

Interface ICs
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an S3C2410X01

S3C2410X01 Allgemeine Beschreibung

PRODUCT OVERVIEW INTRODUCTION This manual describes SAMSUNGs S3C2410X 16/32-bit RISC microprocessor. This product is designed to provide hand-held devices and general applications with cost-effective, low-power, and high-performance microcontroller solution in small die size. To reduce total system cost, the S3C2410X includes the following components separate 16KB Instruction and 16KB Data Cache, MMU to handle virtual memory management, LCD Controller (STN & TFT), NAND Flash Boot Loader, System Manager (chip select logic and SDRAM Controller), 3-ch UART, 4-ch DMA, 4-ch Timers with PWM, I/O Ports, RTC, 8-ch 10-bit ADC and Touch Screen Interface, IIC-BUS Interface, IIS-BUS Interface, USB Host, USB Device, SD Host & Multi-Media Card Interface, 2-ch SPI and PLL for clock generation. The S3C2410X was developed using an ARM920T core, 0.18um CMOS standard cells and a memory complier. Its low-power, simple, elegant and fully static design is particularly suitable for cost- and power-sensitive applications. It adopts a new bus architecture called Advanced Microcontroller Bus Architecture (AMBA). The S3C2410X offers outstanding features with its CPU core, a 16/32-bit ARM920T RISC processor designed by Advanced RISC Machines, Ltd. The ARM920T implements MMU, AMBA BUS, and Harvard cache architecture with separate 16KB instruction and 16KB data caches, each with an 8-word line length. By providing a complete set of common system peripherals, the S3C2410X minimizes overall system costs and eliminates the need to configure additional components. The integrated on-chip functions that are described in this document include:· 1.8V int., 3.3V memory, 3.3V external I/O microprocessor with 16KB I-Cache/16KB D-Cache/MMU · External memory controller (SDRAM Control and Chip Select logic) · LCD controller (up to 4K color STN and 256K color TFT) with 1-ch LCD-dedicated DMA · 4-ch DMAs with external request pins · 3-ch UART (IrDA1.0, 16-Byte Tx FIFO, and 16-Byte Rx FIFO) / 2-ch SPI · 1-ch multi-master IIC-BUS/1-ch IIS-BUS controller · SD Host interface version 1.0 & Multi-Media Card Protocol version 2.11 compatible · 2-port USB Host /1- port USB Device (ver 1.1) · 4-ch PWM timers & 1-ch internal timer · Watch Dog Timer · 117-bit general purpose I/O ports / 24-ch external interrupt source · Power control: Normal, Slow, Idle and Power-off mode · 8-ch 10-bit ADC and Touch screen interface · RTC with calendar function · On-chip clock generator with PLL

Hauptmerkmale

- 16/32-bit ARM920T core running at frequencies up to 203 MHz.
- Integrated memory including 16KB instruction cache, 16KB data cache, 16KB internal SRAM, and external DRAM controller interface.
- Includes various peripherals such as UART, I2C, SPI, GPIO, PWM, USB 1.1 Host/Function, ADC, LCD Controller, and more.
- Supports multiple power modes for different application requirements.

Anwendung

The S3C2410X01 MCU is commonly used in various electronic devices and embedded systems, including but not limited to:
- Mobile phones and smartphones
- Handheld multimedia players
- Digital cameras
- GPS navigation devices
- Industrial automation systems
- Medical equipment
- Automotive electronics
- Consumer electronics

Spezifikationen

Product Category

IC Chips

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..