Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

SJA1000/N1 +BOM

Serial communication interface

Hersteller:

NXP
Herstellerteil #:

SJA1000/N1
Datenblatt:

SJA1000/N1 Datenblatt (PDF)
Part Life Cycle Code:

Obsolete
Pin Count:

28
HTS Code:

8542.31.00.01
Address Bus Width:

8
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an SJA1000/N1

SJA1000/N1 Allgemeine Beschreibung

GENERAL DESCRIPTIONThe SJA1000 is a stand-alone controller for the Controller Area Network (CAN) used within automotive and general industrial environments. It is the successor of the PCA82C200 CAN controller (BasicCAN) from Philips Semiconductors. Additionally, a new mode of operation is implemented (PeliCAN) which supports the CAN 2.0B protocol specification with several new features.

Hauptmerkmale

Pin compatibility to the PCA82C200 stand-alone CAN controller
Electrical compatibility to the PCA82C200 stand-alone CAN controller
PCA82C200 mode (BasicCAN mode is default)
Extended receive buffer (64-byte FIFO)
CAN 2.0B protocol compatibility (extended frame passive in PCA82C200 compatibility mode)
Supports 11-bit identifier as well as 29-bit identifier
Bit rates up to 1 Mbits/s
PeliCAN mode extensions:
– Error counters with read/write access
– Programmable error warning limit
– Last error code register
– Error interrupt for each CAN-bus error
– Arbitration lost interrupt with detailed bit position
– Single-shot transmission (no re-transmission)
– Listen only mode (no acknowledge, no active error flags)
– Hot plugging support (software driven bit rate detection)
– Acceptance filter extension (4-byte code, 4-byte mask)
– Reception of ‘own’ messages (self reception request)
24 MHz clock frequency
Interfaces to a variety of microprocessors
Programmable CAN output driver configuration
Extended ambient temperature range (−40 to +125 °C).

Spezifikationen

Source Content uid	SJA1000/N1	Part Life Cycle Code	Obsolete
Pin Count	28	Reach Compliance Code
HTS Code	8542.31.00.01	Address Bus Width	8
Boundary Scan	NO	Clock Frequency-Max	24 MHz
Data Encoding/Decoding Method	NRZ	Data Transfer Rate-Max	0.125 MBps
External Data Bus Width	8	JESD-30 Code	R-PDIP-T28
JESD-609 Code	e3/e4	Length	35.5 mm
Low Power Mode	YES	Number of Serial I/Os	2
Number of Terminals	28	Operating Temperature-Max	125 °C
Operating Temperature-Min	-40 °C	Qualification Status	Not Qualified
Seated Height-Max	5.1 mm	Supply Voltage-Max	5.5 V
Supply Voltage-Min	4.5 V	Supply Voltage-Nom	5 V
Surface Mount	NO	Technology	CMOS
Temperature Grade	AUTOMOTIVE	Terminal Finish	TIN/NICKEL PALLADIUM GOLD
Terminal Form	THROUGH-HOLE	Terminal Pitch	2.54 mm
Terminal Position	DUAL	Width	15.24 mm
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, LAN

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..