Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

SKY77615 +BOM

Amplifier

Hersteller:

SKYWORKS
Herstellerteil #:

SKY77615
Datenblatt:

SKY77615 Datenblatt (PDF)
Paket/Koffer:

BGA
Produktart:

Interface ICs
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an SKY77615

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SKY77615 Allgemeine Beschreibung

DescriptionThe SKY77500 is a transmit and receive Front End Module (FEM) designed in a low profile (1.2 mm), compact form factor for quad-band cellular handsets comprising GSM850/900, DCS1800, and PCS1900 operation—a complete transmit VCO-to-Antenna and Antenna-to-receive SAW filter solution. The FEM also supports Class 12 General Packet Radio Service (GPRS) multi-slot operation.The module consists of separate GSM850/900 and DCS1800/PCS1900 PA blocks, internal circuitry for matching to 50 Ω input and output impedances, TX harmonics filtering, high linearity and low insertion loss PHEMT RF switches, diplexer, and an integrated power amplifier control (iPAC™) function that utilizes an internal current-sense resistor. A custom silicon integrated circuit contains decoder circuitry to control the RF switches while providing a low current external control interface.Two Heterojunction Bipolar Transistor (HBT) PA blocks are fabricated onto a single Gallium Arsenide (GaAs) die; one supports the GSM850/900 bands and the other supports the DCS1800 and PCS1900 bands. Both PA blocks share common power supply pins to distribute current. The output of each PA block and the outputs to the four receive pins are connected to the antenna pin through PHEMT RF switches and a diplexer. The GaAs die, PHEMT dies, Silicon (Si) die, and passive components are mounted on a multi-layer laminate substrate. The assembly is encapsulated with plastic overmold.Features• High efficiency - GSM850 43% - GSM900 43% - DCS 40% - PCS 40%• Internal ICC sense-resistor for iPAC• Closed loop iPAC or open loop operation with external PAC circuit• Input/Output matching 50 ohms internal (with DC blocking)• TX-VCO-to-antenna and antenna-to-RX-SAW filter RF interface• TX harmonics below –33 dBm·• PHEMT RF switches afford high linearity, low insertion loss and less than 20 µA supply current in receive modes• Small outline - 8 mm x 10 mm• Low profile - 1.2 mm maximum• Low APC current: - 20 µA• Gold plated, lead free contacts• High impedance control inputs, 15 µA, typicalApplications• Quad-band cellular handsets comprised of - Class 4 GSM850/900 - Class 1 DCS1800 PCS1900 - Class 12 GPRS multi-slot operation

Hauptmerkmale

High efficiency
- GSM850 43%
- GSM900 43%
- DCS 40%
- PCS 40%
Internal ICC sense-resistor for iPAC
Closed loop iPAC or open
loop operation with external PAC circuit
Input/Output matching 50
ohms internal (with DC blocking)
TX-VCO-to-antenna and
antenna-to-RX-SAW filter RF interface
TX harmonics below
–33 dBm·
PHEMT RF switches afford
high linearity, low insertion
loss and less than 20 µA
supply current in receive modes
Small outline
- 8 mm x 10 mm
Low profile
- 1.2 mm maximum
Low APC current:
- 20 µA
Gold plated, lead free contacts
High impedance control
inputs, 15 µA, typical

Anwendung

Quad-band cellular handsets comprised of
- Class 4 GSM850/900
- Class 1 DCS1800 PCS1900
- Class 12 GPRS multi-slot operation

Spezifikationen

Product Category

Memory ICs

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..