Bezahlverfahren
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
3.3 V CAN Transceiver with Standby Mode
SOIC (D)-8Hersteller:
Herstellerteil #:
SN65HVD230DR
Datenblatt:
Protocols:
CAN
Number Of Channels:
1
Supply Voltage (V):
3 to 3.6
Bus Fault Voltage (V):
-4 to 16
EDA/CAD Modelle:
Bitte füllen Sie das kurze Formular unten aus und wir werden Ihnen umgehend ein Angebot zukommen lassen..
The SN65HVD230, SN65HVD231, and SN65HVD232 controller area network (CAN) transceivers are compatible to the specifications of the ISO 11898-2 High Speed CAN Physical Layer standard (transceiver). These devices are designed for data rates up to 1 megabit per second (Mbps), and include many protection features providing device and CAN network robustness. The SN65HVD23x transceivers are designed for use with the Texas Instruments 3.3 V µPs, MCUs and DSPs with CAN controllers, or with equivalent protocol controller devices. The devices are intended for use in applications employing the CAN serial communication physical layer in accordance with the ISO 11898 standard.
Designed for operation in especially harsh environments, these devices feature cross wire protection, loss of ground and overvoltage protection, overtemperature protection, as well as wide common mode range of operation.
The CAN transceiver is the CAN physical layer and interfaces the single ended host CAN protocol controller with the differential CAN bus found in industrial, building automation, and automotive applications. These devices operate over a -2 V to 7 V common mode range on the bus, and can withstand common mode transients of ±25 V.
The RS pin (pin 8) on the SN65HVD230 and SN65HVD231 provides three different modes of operation: high speed mode, slope control mode, and low-power mode. The high speed mode of operation is selected by connecting the RS pin to ground, allowing the transmitter output transistors to switch on and off as fast as possible with no limitation on the rise and fall slopes. The rise and fall slopes can also be adjusted by connecting a resistor in series between the RS pin and ground. The slope will be proportional to the pins output current. With a resistor value of 10 kΩ the device will have a slew rate of ~15 V/µs, and with a resistor value of 100 kΩ the device will have a slew rate of ~2 V/µs. See Application Information for more information.
The SN65HVD230 enters a low current standby mode (listen only) during which the driver is switched off and the receiver remains active if a high logic level is applied to the RS pin. This mode provides a lower power consumption mode than normal mode while still allowing the CAN controller to monitor the bus for activity indicating it should return the transceiver to normal mode or slope control mode. The host controller (MCU, DSP) returns the device to a transmitting mode (high speed or slope control) when it wants to transmit a message to the bus or if during standby mode it received bus traffic indicating the need to once again be ready to transmit.
The difference between the SN65HVD230 and the SN65HVD231 is that both the driver and the receiver are switched off in the SN65HVD231 when a high logic level is applied to the RS pin. In this sleep mode the device will not be able to transmit messages to the bus or receive messages from the bus. The device will remain in sleep mode until it is reactivated by applying a low logic level on the RS pin.
(1)The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).
Protocols | CAN | Number of channels | 1 |
Supply voltage (V) | 3 to 3.6 | Bus fault voltage (V) | -4 to 16 |
Signaling rate (max) (MBits) | 1 | Rating | Catalog |
Operating temperature range (°C) | -40 to 85 | Low-power mode | Silent |
Common-mode voltage (V) | -2 to 7 | Isolated | No |
Product Category | CAN Interface IC | Series | SN65HVD230 |
Type | High Speed CAN Transceiver | Mounting Style | SMD/SMT |
Data Rate | 1 Mb/s | Number of Drivers | 1 Driver |
Number of Receivers | 1 Receiver | Supply Voltage - Min | 3 V |
Supply Voltage - Max | 3.6 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Operating Supply Current | 10 mA |
ESD Protection | 16 kV | Number of Transceivers | 1 |
Operating Supply Voltage | 3 V to 3.6 V | Product | CAN Transceivers |
Product Type | CAN Interface IC | Protocol Supported | CAN |
Factory Pack Quantity | 2500 | Subcategory | Interface ICs |
Unit Weight | 0.006349 oz |
After-Sales- und Abwicklungsbezogen
Bezahlverfahren
Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:
[email protected]Versandart
AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..
365-Tage-Produkt
Qualitätsgarantie
Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.
Menge. | Einzelpreis | Ext. Preis |
---|---|---|
1+ | $0,659 | $0,66 |
10+ | $0,561 | $5,61 |
30+ | $0,489 | $14,67 |
100+ | $0,433 | $43,30 |
500+ | $0,414 | $207,00 |
1000+ | $0,403 | $403,00 |
Die unten angegebenen Preise dienen nur als Referenz.
Alle Stücklisten (BOM) können per E-Mail gesendet werden an
[email protected],
oder füllen Sie das untenstehende Formular aus, um ein Angebot für SN65HVD230DR zu erstellen, garantierte Angebote zurück innerhalb
12 Std.