Bezahlverfahren
ST10F276-6QR3 +BOM
ST10F276E - 16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbute RAM, ST10F276-6QR3, STMicroelectronics
QFP-
Hersteller:
-
Herstellerteil #:
ST10F276-6QR3
-
Datenblatt:
-
Series:
Automotive, AEC-Q100, ST10
-
Core Processor:
ST10
-
Core Size:
16-Bit
-
Speed:
64MHz
-
EDA/CAD Modelle:
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for ST10F276-6QR3, guaranteed quotes back within 12hr.
Verfügbarkeit: 7886 Stck
Bitte füllen Sie das kurze Formular unten aus und wir werden Ihnen umgehend ein Angebot zukommen lassen..
ST10F276-6QR3 Allgemeine Beschreibung
The ST10F276-6QR3 microcontroller is equipped with an impressive array of memories, including 512 Kbyte Flash memory (32-bit fetch), 320 Kbyte extension Flash memory (16-bit fetch), and a generous 66 Kbyte extension RAM (XRAM). This abundance of memory ensures that your applications run smoothly and efficiently
Hauptmerkmale
- Highly performance 16-bit CPU with DSP functions
- 31.25ns instruction cycle time at 64MHz max CPU clock
- Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator
- Enhanced boolean bit manipulations
- Single-cycle context switching support
- 31.25ns instruction cycle time at 64MHz max CPU clock
- Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator
- Enhanced boolean bit manipulations
- Single-cycle context switching support
- On-chip memories
- 512 Kbyte Flash memory (32-bit fetch)
- 320 Kbyte extension Flash memory (16-bit fetch)
- Single voltage Flash memories with erase/program controller and 100K erasing/programming cycles
- Up to 16 Mbyte linear address space for code and data (5 Mbytes with CAN or I2C)
- 2 Kbyte internal RAM (IRAM)
- 66 Kbyte extension RAM (XRAM)
- 512 Kbyte Flash memory (32-bit fetch)
- 320 Kbyte extension Flash memory (16-bit fetch)
- Single voltage Flash memories with erase/program controller and 100K erasing/programming cycles
- Up to 16 Mbyte linear address space for code and data (5 Mbytes with CAN or I2C)
- 2 Kbyte internal RAM (IRAM)
- 66 Kbyte extension RAM (XRAM)
- External bus
- Programmable external bus configuration & characteristics for different address ranges
- 5 programmable chip-select signals
- Hold-acknowledge bus arbitration support
- Programmable external bus configuration & characteristics for different address ranges
- 5 programmable chip-select signals
- Hold-acknowledge bus arbitration support
- Interrupt
- 8-channel peripheral event controller for single cycle interrupt driven data transfer
- 16-priority-level interrupt system with 56 sources, sampling rate down to 15.6ns
- 8-channel peripheral event controller for single cycle interrupt driven data transfer
- 16-priority-level interrupt system with 56 sources, sampling rate down to 15.6ns
- Timers
- 2 multi-functional general purpose timer units with 5 timers
- 2 multi-functional general purpose timer units with 5 timers
- Two 16-channel capture / compare units
- 4-channel PWM unit + 4-channel XPWM
- A/D converter
- 24-channel 10-bit
- 3 μs minimum conversion time
- 24-channel 10-bit
- 3 μs minimum conversion time
- Serial channels
- 2 synch. / asynch. serial channels
- 2 high-speed synchronous channels
- 1 I2C standard interface
- 2 synch. / asynch. serial channels
- 2 high-speed synchronous channels
- 1 I2C standard interface
- 2 CAN 2.0B interfaces operating on 1 or 2 CAN busses (64 or 2x32 message, C-CAN version)
- Fail-safe protection
- Programmable watchdog timer
- Oscillator watchdog
- Programmable watchdog timer
- Oscillator watchdog
- On-chip bootstrap loader
- Clock generation
- On-chip PLL with 4 to 12 MHz oscillator
- Direct or prescaled clock input
- On-chip PLL with 4 to 12 MHz oscillator
- Direct or prescaled clock input
- Real-time clock and 32 kHz on-chip oscillator
- Up to 111 general purpose I/O lines
- Individually programmable as input, output or special function
- Programmable threshold (hysteresis)
- Individually programmable as input, output or special function
- Programmable threshold (hysteresis)
- Idle, power down and stand-by modes
- Single voltage supply: 5V ±10% (embedded regulator for 1.8 V core supply)
Spezifikationen
Category | Integrated Circuits (ICs)EmbeddedMicrocontrollers | Series | Automotive, AEC-Q100, ST10 |
Core Processor | ST10 | Core Size | 16-Bit |
Speed | 64MHz | Connectivity | ASC, CANbus, EBI/EMI, I²C, SSC, UART/USART |
Peripherals | POR, PWM, WDT | Number of I/O | 111 |
Program Memory Size | 832KB (832K x 8) | Program Memory Type | FLASH |
EEPROM Size | - | RAM Size | 68K x 8 |
Voltage - Supply (Vcc/Vdd) | 4.5V ~ 5.5V | Data Converters | A/D 24x10b |
Oscillator Type | Internal | Operating Temperature | -40°C ~ 125°C (TA) |
Mounting Type | Surface Mount | Base Product Number | ST10F |
Servicerichtlinien und andere
After-Sales- und Abwicklungsbezogen
Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:
[email protected]Versandart
AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..
365-Tage-Produkt
Qualitätsgarantie
Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.
In Stock: 7.886
Minimum Order: 1
Menge. | Einzelpreis | Ext. Preis |
---|---|---|
1+ | - | - |
Die unten angegebenen Preise dienen nur als Referenz.
The programmer went for a short time, the seller himself extended the protection. it works properly, the star shot for what came under another track number not with what the seller gave.