Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

STA333BW +BOM

Audio Amplifiers

Hersteller:

STMicroelectronics, Inc
Herstellerteil #:

STA333BW
Datenblatt:

STA333BW Datenblatt (PDF)
Series:

STA333B
Product:

Audio Subsystems
Class:

Class-AB
Output Power:

20 W
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an STA333BW

STA333BW Allgemeine Beschreibung

The STA333BW is an integrated solution of digital audio processing, digital amplifier controls and power output stages to create a high-power single-chip FFX digital amplifier with high-quality and high-efficiency. Three channels of FFX processing are provided. The FFX processor implements the ternary, binary and binary differential processing capabilities of the full FFX processor. The STA333BW is part of the Sound Terminal®family that provides full digital audio streaming to the speakers and offers cost effectiveness, low power dissipation and sound enrichment. The power section consists of four independent half-bridges. These can be configured via digital control to operate in different modes. For example, 2.1 channels can be provided by two half-bridges and a single full-bridge, supplying up to 2 x 9 W + 1 x 20 W of output power or two channels can be provided by two full-bridges, supplying up to 2 x 20 W of output power. The IC can also be configured as 2.1 channels with 2 x 20 W supplied by the device plus a drive for an external FFX power amplifier, such as STA533WF or STA515W. The serial audio data input interface accepts all possible formats, including the popular I²S format. The high-quality conversion from PCM audio to FFX PWM switching provides over 100 dB of SNR and of dynamic range. Also provided in the STA333BW are a full assortment of digital processing features. This includes up to 5 programmable biquads (EQ) per channel. Available presets enable a time-to-market advantage by substantially reducing the amount of software development needed for functions such as audio preset volume loudness, preset volume curves and preset EQ settings. There are also new advanced AM radio interference reduction modes. The DRC dynamically equalizes the system to provide a linear frequency speaker response regardless of output power level.

Hauptmerkmale

Wide-range supply voltage, 4.5 V to 21.5 V
Three power output configurations:
2 channels of ternary PWM (2 x 20 W into 8 Ω at 18 V) + PWM output
2 channels of ternary PWM (2 x 20 W into 8 Ω at 18 V) + ternary stereo line-out
2.1 channels of binary PWM (left, right, LFE) (2 x 9 W into 4 Ω +1 x 20 W into 8 Ω at 18 V)
2 channels of ternary PWM (2 x 20 W into 8 Ω at 18 V) + PWM output
2 channels of ternary PWM (2 x 20 W into 8 Ω at 18 V) + ternary stereo line-out
2.1 channels of binary PWM (left, right, LFE) (2 x 9 W into 4 Ω +1 x 20 W into 8 Ω at 18 V)
FFX with 100-dB SNR and dynamic range
Scalable FFX modulation index
Selectable 32- to 192-kHz input sample rates
I²C control with selectable device address
Digital gain/attenuation +48 dB to -80 dB with 0.5-dB/step resolution
Soft volume update with programmable ratio
Individual channel and master gain/attenuation
Dynamic range compression (DRC) or anticlipping mode
Audio presets:
15 preset crossover filters
5 preset anticlipping modes
Preset night-time listening mode
15 preset crossover filters
5 preset anticlipping modes
Preset night-time listening mode
Individual channel soft/hard mute
Independent channel volume and DSP bypass
I²S input data interface
Input and output channel mapping
Automatic invalid input-detect mute
Up to 5 user-programmable biquads/channel
Three coefficients banks for EQ presets storing with fast recall via I²C interface
Bass/treble tones and de-emphasis control
Selectable high-pass filter for DC blocking
Advanced AM interference frequency switching and noise suppression modes
Sub channel mix into left and right channels
Selectable high- or low-bandwidth noise-shaping topologies
Selectable clock input ratio
96 kHz internal processing sample rate
Thermal overload and short-circuit protection technology
Video apps: 576 x fSinput mode supported
Pin and SW compatible with STA335BW, STA339BW, STA339BWS, STA559BW and STA559BWS

Spezifikationen

Product Category:	Audio Amplifiers	Series:	STA333B
Product:	Audio Subsystems	Class:	Class-AB
Output Power:	20 W	Mounting Style:	SMD/SMT
Type:	1-Channel Mono or 2-Channel Stereo	Audio - Load Impedance:	8 Ohms
THD plus Noise:	0.2 %	Minimum Operating Temperature:	0 C
Maximum Operating Temperature:	+ 70 C	Packaging:	Tube
Description/Function:	Speaker	Dual Supply Voltage:	3.3 V, 5 V, 9 V, 12 V, 18 V
Height:	2.4 mm	Input Type:	Single
Length:	10.5 mm	Maximum Dual Supply Voltage:	3.6 V, 20 V
Minimum Dual Supply Voltage:	2.7 V, 4.5 V	Number of Channels:	2 Channel
Operating Supply Current:	30 mA	Output Signal Type:	Differential, Single
Product Type:	Audio Amplifiers	PSRR - Power Supply Rejection Ratio:	80 dB
Subcategory:	Audio ICs	Supply Type:	Quad
Width:	7.6 mm

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..