Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

TLC2264CN +BOM

Quad, 16-V, 710-kHz operational amplifier

Hersteller:

Texas Instruments, Inc
Herstellerteil #:

TLC2264CN
Datenblatt:

TLC2264CN Datenblatt (PDF)
Number Of Channels:

4
Total Supply Voltage (+5 V = 5, ±5 V = 10) (max) (V):

16
Total Supply Voltage (+5 V = 5, ±5 V = 10) (min) (V):

4.4
Rail-to-rail:

In to V-, Out
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an TLC2264CN

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TLC2264CN Allgemeine Beschreibung

The TLC2262 and TLC2264 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC226x family offers a compromise between the micropower TLC225x and the ac performance of the TLC227x. It has low supply current for battery-powered applications, while still having adequate ac performance for applications that demand it. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. Figure 1 depicts the low level of noise voltage for this CMOS amplifier, which has only 200 uA (typ) of supply current per amplifier.

The TLC226x, exhibiting high input impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC226xA family is available and has a maximum input offset voltage of 950 uV. This family is fully characterized at 5 V and ±5 V.

The TLC2262/4 also makes great upgrades to the TLC27M2/L4 or TS27M2/L4 in standard designs. They offer increased output dynamic range, lower noise voltage and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442. If your design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.

Hauptmerkmale

Output Swing includes Both Supply Rails
Low Noise.12 nV/Hz\ Typ at f = 1 kHz
Low Input Bias Current.1 pA Typ
Fully Specified for Both Single-Supply and Split-Supply Operation
Low Power.500 uA Max
Common-Mode Input Voltage Range Includes Negative Rail
Low Input Offset Voltage
950 uV Max at T_A = 25°C (TLC2262A)
Macromodel Included
Performance Upgrade for the TS27M2/M4 and TLC27M2/M4
Available in Q-Temp Automotive
HighRel Automotive Applications
Configuration Control/Print Support
Qualification to Automotive Standards

Advanced LinCMOS is a trademark of Texas Instruments.

Spezifikationen

Number of channels	4	Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)	16
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)	4.4	Rail-to-rail	In to V-, Out
GBW (typ) (MHz)	0.71	Slew rate (typ) (V/µs)	0.55
Vos (offset voltage at 25°C) (max) (mV)	2.5	Iq per channel (typ) (mA)	0.2
Vn at 1 kHz (typ) (nV√Hz)	12	Rating	Catalog
Operating temperature range (°C)	0 to 70	Offset drift (typ) (µV/°C)	2
Features	High Cload Drive	Input bias current (max) (pA)	60
CMRR (typ) (dB)	83	Iout (typ) (A)	0.0022
Architecture	CMOS	Input common mode headroom (to negative supply) (typ) (V)	-0.3
Input common mode headroom (to positive supply) (typ) (V)	-0.8	Output swing headroom (to negative supply) (typ) (V)	0.01
Output swing headroom (to positive supply) (typ) (V)	-0.06	feature-type	Low Noise Amplifier
feature-number-of-channels-per-chip	4	feature-rail-to-rail	Rail to Rail Output
feature-process-technology	LinCMOS	feature-output-type	CMOS
feature-maximum-input-offset-voltage-mv	2.5@±2.5V	feature-maximum-supply-current-ma
feature-maximum-input-offset-current-ua	0.0000005(Typ)@±2.5V	feature-maximum-input-bias-current-ua	0.0001@±2.5V@0C to 70C
feature-maximum-power-dissipation-mw	1150	feature-typical-slew-rate-v-us	0.55@5V
feature-typical-gain-bandwidth-product-mhz	0.71	feature-shut-down-support	No
feature-packaging	Tube	feature-rad-hard	No
feature-pin-count	14	feature-cecc-qualified	No
feature-esd-protection		feature-escc-qualified
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-eccn-code	EAR99
feature-svhc	No	feature-svhc-exceeds-threshold	No

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..

Garantie

365-Tage-Produkt

Qualitätsgarantie

Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.

Bewertungen und Rezensionen

Mehr

B**O 04.05.2020

The item was delivered very fast, corresponds with description. I will purchase more.The goods are received in the shortest possible time, corresponds to the description. I'll buy more.